Question about Mitsubishi WD-73827 73" HDTV DLP TV
73 inch no power at all I unplug the cord for a couple days plugged it back in and still no power help
Posted on Jan 16, 2012
that means your lamp it is getting to the end of its life.
sometimes even if the lamp still good the TV will send you that message because that timer is closed to 5000 hours
What you can do is open the lamp door, closed again and the tv will ask you if you replaced it the lamp, and just say yes and that sign will go away
or just simple replace the lamp. 915P020010
Posted on Apr 18, 2009
if ure handy pop the back off and there should be a main power board and a fuse on it, make sure you use the same fuse if it is blown do not stick another type or size in it, put it back together and turn it on if it blows again it will be somthing else if not it should work
Posted on Sep 24, 2009
SOURCE: Lamp Indicator is Red
I just fixed the same problem and it needed 3 capacitors on the power supply circuit board. Two of them were 3300uF 10V. All 3 capacitors were bulged out on the top and measure defective. After replacing them the TV worked fine.
Posted on Dec 05, 2010
Tips for a great answer:
Feb 01, 2015 | Mitsubishi Wd-73740 73 Projection 1080p Tv
Feb 01, 2015 | Mitsubishi Wd-73740 73-inch 1080p 3d Ready...
Sep 25, 2014 | Mitsubishi WD-73640 73-Inch 1080p...
May 17, 2014 | Mitsubishi Televison & Video
Jan 26, 2014 | Mitsubishi WD-73827 73" HDTV DLP TV
Nov 23, 2013 | Mitsubishi WD-73833 73" HDTV
Aug 21, 2012 | Mitsubishi WD-73737 73 in. HD-Ready TV
435 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: