Muratec F320 Plain Paper LED Fax Logo

Related Topics:

Anonymous
Anonymous Posted on Oct 12, 2011
Be the first to answer

Muratec f320 message states replace drum soon. did replacement message still there

Answer This Question

3 Related Answers

Anonymous

  • 1 Answer
  • Posted on Dec 13, 2008

SOURCE: How do I reset the drum counter on a Muratec F320?

Ok, this is how I resolved it for my fax machine.
I powered down the fax, removed the new drum and reseated it.
When I powered it back on the counter reset itself as it is supposed to.

Ad

Anonymous

  • 1218 Answers
  • Posted on May 28, 2010

SOURCE: muratec f320 states: fax ready

F-320 "Please call Service".....Press PROGRAM,*,6.....Press PROGRAM to select "Service Call"....error message will now be displayed.
Most common is #02 (Heater Error) which means you have a defective fuser.
Press PROGRAM to show any other error messages.
Press "STOP" TO EXIT.

Anonymous

  • 1218 Answers
  • Posted on May 28, 2010

SOURCE: muratec f320 states: fax ready

Press ..Program, *, 6 ....Press Program to select "Service Call" then press ENTER...the error message will be displayed.
Most common prob was "Heater error" which means a defective fuser unit.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

New drum
It is important that you replace the drum when the machine is saying "REPLACE DRUM"...NOT when it is saying "REPLACE DRUM SOON".
When the machine says "SOON" it is advising to have a drum on-hand ready for replacement. The machine will still be able to print pages. When the machine says "RPLACE DRUM" it will no longer print and a new drum cartridge must be installed to reset the indicator.
Read full answer
Jun 04, 2010 • Muratec F320 Plain Paper LED Fax
2helpful
1answer

Alarm says replace drum soon. Can the message be
The "replace drum soon" indicater is a warning for you to have a new replacement drum "on-hand". Soon the display will change to "REPLACE DRUM" AT WHICH TIME THE UNIT WILL STOP PRINTING.
When the new drum cartridge is then installed...the REPLACE DRUM indicator will be reset. DO NOT replace the drum before the machine says to.
Read full answer
Jun 04, 2010 • Muratec F320 Plain Paper LED Fax
0helpful
1answer

Muratec f320 states: fax ready please call service it continues to send faxes but is not receiving
F-320 "Please call Service".....Press PROGRAM,*,6.....Press PROGRAM to select "Service Call"....error message will now be displayed.
Most common is #02 (Heater Error) which means you have a defective fuser.
Press PROGRAM to show any other error messages.
Press "STOP" TO EXIT.
Read full answer
May 14, 2010 • Muratec F320 Plain Paper LED Fax
0helpful
1answer

"Replace Drum" error ...HELP!
Drum is only to be replaced when machine says "Replace Drum".
Not "Replace drum soon".
Try Programm, * , * , I(Capital Letter I ), then ENTER.
Should reset it.
Read full answer
Apr 22, 2010 • Muratec F320 Plain Paper LED Fax
0helpful
1answer

Muratec f320 states: fax ready please call service it continues to send faxes but is not receiving
Press ..Program, *, 6 ....Press Program to select "Service Call" then press ENTER...the error message will be displayed.
Most common prob was "Heater error" which means a defective fuser unit.
Read full answer
Mar 26, 2010 • Muratec F320 Plain Paper LED Fax
0helpful
1answer

How do you reset memory board for muratec f-320 . I am trying to get rid of an error message"Replace drum unit printer not useable". Installed new drum unit and still gives the same error message.
Before doing complete Memory clear try the following...
Press..PROGRAM,*,*,I(thats the letter I),then ENTER.
That should reset it. Only replace the new drum into the machine when the machine says "Replace Drum"...NOT when it says "replace drum soon".
As a last resort a complete memory clear is PROGRAM,*,3.....but be warned this will clear all memory back to factory defaults "except" the Life Monitor which has the counters.
Read full answer
Oct 29, 2009 • Muratec F320 Plain Paper LED Fax
1helpful
1answer

CALL FOR SERVICE MESSAGE ON A MURATEC MFX1200
Yes the Call Service Message on Muratec is directly tied to Imaging Unit replacment. Especially if you are not getting any codes in the display.
Read full answer
Oct 20, 2009 • Muratec F320 Plain Paper LED Fax
3helpful
2answers

Muratec mfx 1600 drum replaced alarm will not reset
Ignoring the Toner Empty Message
 When the toner cartridge is empty, the machine shows a “Toner Empty”
message and stops printing.
You can set the machine to ignore the message when it displays and to
continue printing the pages.
1 Press Menu until “Machine Setup” appears on the display.
2 Press the scroll button (�� or ��) until “Ignore Toner” appears on the
bottom line and press Enter.
3 Press the Scroll button (�� or ��) to select “On” or “Off.”
Select “On” to ignore the Toner Empty message.
Select “Off” to stop printing when the message appears. This is the
default setting.
4 Press Enter to save the selection.
Read full answer
Jun 18, 2009 • Muratec F320 Plain Paper LED Fax
1helpful
1answer

DRUM LIGHT WILL NOT CLEAR
As far as I know there is no "manual" way of resetting this. The new drum has a small glass fuse which should blow when it is placed in a machine for the first time. It is the machine "seeing" this fuse blow that resets the message.

Are you using a "new" drum or one that has been in another machine?

You can try to fit a new fuse to the drum.
Read full answer
May 14, 2009 • Muratec F320 Plain Paper LED Fax
5helpful
2answers

How do I reset the drum counter on a Muratec F320?
Ok, this is how I resolved it for my fax machine.
I powered down the fax, removed the new drum and reseated it.
When I powered it back on the counter reset itself as it is supposed to.
Read full answer
Nov 12, 2008 • Muratec F320 Plain Paper LED Fax
Not finding what you are looking for?

View Most Popular

F320 Plain Paper LED Fax

  • Office Equipment & Supplies

Related Question

New drum

  • Muratec F320 Plain Paper LED Fax

149 views

Ask a Question

Usually answered in minutes!

Popular Questions

Call servce 18 muratec mfx 2010

Muratec Copier

How do I reset the drum counter on a Muratec F320?

Muratec F320 Plain Paper LED Fax

Muratec mfx 2010 how to reset drum & developer counter

Muratec Office Equipment & Supplies

Reset drum counter on a muratec mfx 1430

Muratec MFX-1430 Copier

MFX -2380 (Muratec) issue with net work printing

Muratec MFX-2830 Black and White...

Check Out the Latest Printers Report
Check Out the Latest Printers Report

View all Fixya Reports

Top Muratec Office Equipment & Supplies Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ngoro

Level 3 Expert

3521 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66830 Answers

Are you a Muratec Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. F320 Plain Paper LED Fax Manual

F320 Plain Paper LED...

Loading...