I need a parts list; I found a stray part in the bottom of the dishwasher

Go to manufacturers website with complete model #. You should be able to find parts list there.

Hello,
Its hard to tell from the description what it is. Does it like item #4 in first link OR item #31 in second link. If it is item #31 in second link its soundproofing insulation that attaches to kick plate and has come loose,a couple dabs of super glue would reattach it to kickplate
http://www.searspartsdirect.com/partsdirect/part-model/Kitchenaid-Parts/Dishwasher-Parts/Model-KUDS30IVWH3/0593/0130000/W1005148/00003?blt=06&prst=&shdMod= item #4

http://www.searspartsdirect.com/partsdirect/part-model/Kitchenaid-Parts/Dishwasher-Parts/Model-KUDS30IVWH3/0593/0130000/W1005148/00005?blt=06&prst=&shdMod= item #31


If it is item 4 thatsa seal on bottom of door and needs to be there to prevent leaks

Gene

I also went crazy looking for this part! I even went to the waring website and tried to figure out which deep dryer I had that would match the 4 diff. chords they have as replacements, then I discoverd smallappliance.com' "finally", an answer. they have a list of model numbers that you can choose from by model number. So i read thier instructions, went to the back or bottom of my deep fryer, found the model number, mine was DF250B, ordered the part from the list of thier model numbers and presto $14.00 later, I'm having my chord shipped to me!!!!!!!!Waring needs to do a better job putting the two together. Good luck everyone!

do you mean the machine stays in the drain mode?
if that is what you are saying then your machine has water in the base and the float is activated.you must remove the water in the bottom of the base. to get to bottom base you can t due this by taking the side panel and use a flashlight to see the water. dry the base and the float will de activate.it will take it out of drain mode. there is probably a small pin hole in the hose and the water is tricking down into the dishwashers base.

few things
(1)make sure drain line has a high loop going to the drain not just a strait shot and its clear of ubstruction.
(2)there is a screen at the bottom of the tub unscrew it and check for a blockage.
(3)check the pump
If you require a part i recommend appliance parts solutions they have the cheepest parts i have found.
good luck!

it is sound proofing and, your dishwasher is safe to use

yes just go to the website of the diswasher that you own and look for prouduct or parts list

pull out washer disconnect lines unplug it open the door pull out the racks(room to work) look for any stray parts laying at the bottom(small black belt,srews any metal debris)if you find any of that try to find where it came off of.it sounds like a pump problem easy fix connect hoses to pump and mount the pump.check all hoses and spray tips thoroughly

Take a look here Amazon com Miele Dishwasher parts. Hope you can find something. cheers

They are probably still attached to the power drive