Need parts - Sharper Image Professional Plus Ionic Breeze? QUADRA GP Silent (SI861) (2 Pack) Air Purifier

here are parts for your air purifier, including the motor and other parts you may need in the future.

AirPurifierRepair. - just click the link

hope that helps, good luck

This is definitely one of those "easy when you know how" things. No screws or plates or anything to remove. It is a case of getting the old one out and slipping in the new part:

The part clips in so you need to unclip the old (broken) one to get it out.

You need a small flat head screw driver to unclip the old one. You come into the opening via the UNDERSIDE of the vac as in pic one. You will release it and pull the old part out via the top side.


Below is a pic of the removed (broken) part. The arrows show the two round nipple like ends and these are what you need to release using the screw driving (and then pulling the part out the top).



Once you have the old part out the new one is slid in via the TOP of vacuum and clicks into place

This next pic gives you an idea of what you are trying to achieve.
The RED arrows are the new part in place. The YELLOW arrow shows what the "two round nipples" click into.



Sorry the pics are not better.

Tony Bowling

Since it's a Kenmore unit, you can find the Owner's Manual online at a Sears Parts Direct.

Thanks for choosing FixYa.

Sagan, here's a link where you can find the parts you need. http://www.airpurifierrepair.com/
You can purchase them online.

Hope this helps you get the parts you need. if so, please be knid enough to leave a positive rating. Thanks!

The cover where the parts are located is in the back of the freezer section, you will have to remove the screws and you will be able to gain access to all the parts.

www.royalairpurifiers.com this is a link to the new company.
Steve established a new company after Ted's death

E mail to [email protected]. List the parts you need and the serial number. They'll be glad to help you!

I found the part that I needed on the intenet and purchased it yesterday. Thanks

I have some parts in stock and can order ones that you need.

Becky
716-652-6053

[email protected]