Question about Frigidaire FAH125P2T Air Conditioner

1 Answer

I have an Emailair WS/CWS034HA split system air conditioner. The unit works well when I operate it from the system itself but the remote doesn't start or operate the system. The remote is transmitting but the unit doesn't seem to receive the signal. There is a bank of 4 dip switches in the remote, these may possibly be set incorrectly. Any help would be greatly appreciated.

Posted by Jason Evans on

Ad

1 Answer

Sammyy06

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Central Air Conditioner Split System Dip Switch Settings for remote...
1 off, 2 on, 3 on, 4 on
I also found dry joints on the bord

Posted on Jun 04, 2012

  • Sammyy06 Jun 04, 2012

    Central Air Conditioner Split System Dip Switch Settings for remote...
    1 off, 2 on, 3 on, 4 on
    I also found dry joints on the main board which I resoldered. If your remote is frozen you need to reset it..Press at the same time
    - set clear buttons...

×

Ad

2 Related Answers

hvac1960

R Subramaniyam Iyer

  • 2133 Answers

SOURCE: I have an emailair

Better to go with new remote.

Posted on Dec 31, 2010

Ad

Anonymous

  • 553 Answers

SOURCE: require specifications for an Emailair split level

Capacity which normaly known as Horse Power
or RA rating

The voltage input
Ampere ratings
voltage phase ex. (single phase or three phase)

Type: Split type

since it is split type there are several classification(wall mounted, foor mounted or ceiling mounted)


Posted on Oct 31, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to know that how mini split system automatic work? there is any thermostate or any other device?


Generally, they are operated by a remote control (similar to a television), although some units do have a wired wall control option as well. The indoor and outdoor unit has sensors that measure temperature (to control the operation of the mini-split) and (once the remote is set) the sensors control the system until it reaches the set point set on the remote.

Jul 25, 2016 | LG LS-K1830CL Cool Mini Split Air...

1 Answer

Cannot turn unit on with remote


Hello,

the problem lies between the remote sensor of the unit or the remote control itself.

You need to test the remote with another unit or test another remote with the unit to actually confirm where the fault is coming from.

Regards.

Jan 05, 2012 | Sanyo Split System Air Conditioner

1 Answer

I got a C9 error on a C12AWR artcool split ac which doesn't work anymore i replaced the mainboard of the outdoor unit which didn't help i replaced the fan motor which didn't help either does...


Split = Outdoor unit fan problem. Check Outdoor fan motor is plugged in, Electrically & Mechanically sound, if not replace motor, otherwise replace PCB. Multi V
= indoor PCB failure. Replace PCB.

Let me informed again if problem persists,.

Oct 25, 2011 | LG LA185HV Split System Air Conditioner

1 Answer

Have a 18,000 btu amcoraire duo split unit and lost remote control how can you adjust temp without the remote


You can't adjust anything without the remote,
go to ebay.com search Amcoraire remote control, you will find what you need.

Jul 08, 2011 | AmcorAire UCHW-H12AF2 Split System Air...

1 Answer

Remote control signal to multi or split air conditioner, samsung


maybe the lightning has something to do with that but to make it sure try to call a service person and try to refer it and kindly ask some explanation if he can fix it so that next time you can justify the reason this thing happened.

Jun 16, 2009 | GE Quiet-Aire Ductless Split System Air...

2 Answers

Kelvinator Split System Air Conditioner not turning on.


On some remotes there is a reset button which is pressed by using the nib of a pen. Or if this does not work you should look under the cover for a manual button, most units have one, and see if the aircon responds. I suspect your remote sensor is faulty, but try the previous suggestions first.

Jan 18, 2009 | Heating & Cooling

2 Answers

LG Spilt A/C


medev,

there is a lot of reason why your LG split unit would not work by remote control.
first likely trouble is the remote itself. it could have drop from a height and broke the remote, or corrosion has set inside the remote if you left an old battery for a long time and it could have broken it.

secondly which is not more likely to happen is the remote receiver in your unit got broke that is why it can not communicate with your remote controller. it could happen if someone has serviced your evaporator and could have disconnected wires to the receiver , or wires were just left not connected.

you can test the remote if you have an identical unit which is working with a working remote. use the working remote to your unit then you can decide.
i hope i was able to help.

Jun 24, 2008 | LG LS-L1210CL Mini Split Air Conditioner

1 Answer

No Display on controller


Try replacing the battery but if it wont work you need to replace the remote control itself, but for the main time you can operate the unit by pressing the emergency switch button to operate the unit manually.

e954fbb.jpg

Jan 09, 2008 | LG LS-L1210CL Mini Split Air Conditioner

Not finding what you are looking for?
Frigidaire FAH125P2T Air Conditioner Logo

947 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Heating & Cooling Experts

Brad Brown

Level 3 Expert

18455 Answers

Mike

Level 3 Expert

4369 Answers

Harjeet s. bola
Harjeet s. bola

Level 2 Expert

49 Answers

Are you a Frigidaire Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...