Cassio TE-2200 - Dept Keys

Manual:
http://totalpos.co.nz/wp-content/uploads/2012/10/TE4000F_E.pdf

says:
E026 No condiment/preparation PLU is registered

Solution:
Register condiment/preparation PLU.
See page 88 of the manual how to do this.

Friend see, the following example
I think, it will you.

Thanks
Iqbal

The PLU has a condiment or preparation PLU association. It needs to be told which PLU you are linking. For example, a PLU set for steak may need to be told the PLU for medium rare or well done. Otherwise, you need to use the codes to turn off the condiment/ prep link from the dealer manual. If you need it, one of the users has the manual here:
http://the-checkout-tech.com/manuals/cashregisters/Casio_TE-2200_and_TE-2400_dealers_manual.html

First finish the sale currently being entered or cancel it. then turn key to program and press 3 subtotal, then press 0 and then the button which currently is requiring condiment entry then subtotal. turn key back to reg

You have set that item to be linked to a condiment/ prep PLU which means you set the wrong digit during tax linking. go back and turn the condiment/ prep PLU feature off

Try this: Turn key to program. 3 SUBTOTAL 0 Now press the bad department SUBTOTAL
-----------------------------------------------------------
If anyone needs a Casio SE-S300 manual, http://the-checkout-tech.com/manuals/cashregisters/Casio_SE-S300_users_and_programming_manual.html

You have set that PLU as a condiment PLU while setting tax status for it I'd say. Check the setting for condiment and turn it off.

Hi. You have been given the wrong instructions. That is why it is now all screwed up. Pricing is dead easy. You have condiments setup because you have set key features in prog 3 mode. It shouldn't be too hard to fix. We'll start with prices: Turn key to Program mode Type the price (no decimal point) Press a PLU (item button) to set the price to. Press SUBTOTAL To remove condiments, you need prog 3 mode. While key is on program, press 3 then SUBTOTAL. The display must change to "P3" Now press 0 (zero) then one of the PLUs that has condiments set. Press SUBTOTAL to finish. It may remove the tax status, so turn back to REG mode and test the PLU. If the tax has gone, then reprogram the tax setting for that PLU. Let me know if you get stuck. Mark

find out what plu it is then re pgm it

turn the key to PGM
enter 3 & press Subtotal
enter 0166 & press Subtotal
enter 0 and press the faulty PLU
now press Subtotal

enter 1066 & press Subtotal
enter 0 and press the faulty PLU
now press Subtotal
turn the key back to Reg

Hi Cathy,
You sure have been programming the Departments. You have turned on a link feature to a condiment PLU, so go back, and turn that off for the departments that you have it set to on. The digit limit has also been set too low, so now the machine has been told to accept low amounts only in those departments, so you will need to go into those departments, and set the Digit limit (sometimes called HALO) to a higher value.
If you don't know what you did to cause this problem, just do a program read of the departments, and have a look at the ones that work, then set the others to the same values.

If you still have problems, then type out the values of a good dept, and a bad dept, and I'll tell you the difference.

Mark