Kenmore mod. 106 water does not get to ice maker and when pushing despenor no rotation of ice out door

Check the auger that moves the ice, it may be sticking to frozen in place.

The water supply solenoid valve may be malfunctioning or the fill tube to the icemaker may be mis-positioned.

yes. check if the fill tube to the ice maker is clog

Ice in the path of air flow to fridge. The freezer also kkeps the fridge cold via a fan that blows the cold air from feezer to fridge.

the ice maker unit prob' bad and if you sure it is on and the flag is not stoping it from runing you might need a new unit but there are other tests you can do before..
call me 843.789.4824
Im in Charleston S.C but will happy to help you
www.911servicetoday.com

check for a child lockout button it will look like a tiny padlock ,press and hold for 3 sec.(could be the freezer door light switch)

water valve or icemaker or make sure freezer is freezing check see if you have frost build up

Check to make sure you freezer is at 0 to 5 degrees. If it is not the water valve to the ice maker will not even open.

hi LOP7,
In most cases you can easily solve this problem.
step one would be to make sure your freezer is getting cold enough. If you have icecream in your freezer is it frozen solid or is it soft. Most icemakers cycle around 0 degrees and if your freezer is not getting to 0 then it will not cycle and it will not make ice.
Step two would be to make sure you icemake is cycling. To do this simply lift the little shut off arm on your icemaker and wait about an hour then go back to the icemaker and drop the arm down. The icemaker should start going through a cycle. You should notice the arm slowly begin to raise and the ice dispencer fingers will begin to turn. Then you will hear it call for water. You may hear a humm.
If the freezer is cold enough and the icemaker is cycling that only leaves the inlet valve. replace the valve and enjoy the ice.
If the freezer is cold enought and the icemaker does not cycle, then you have a bad icemaker. Simply replace the icemaker and viola.
Third if the freezer is not cold enought 0 defrees. Then you may have a defrost problem. In this case post more info and I will be happy to help. Good luck [email protected]

chances are dispenser board is bad check power going in the board should be 120 volts and power out if no power out replace board