Question about Televison & Video
Hi, I saw someone else had a similar problem to mine and you tried to help them so I figured I ask you also. I have a Sony Videoscope XBR 53" XP53XBR45 TV. I'm also getting bowing. Mine bows on the top, bottom and right side. and I'm getting triple images. I hears it could be a convergence problem. If so, is this something that needs an adjustment or a new part? I heard that there isn't any parts available for this TV anymore. Thanks..
This is a convergence problem. Look in the back for a couple of large black ICs attached to a heatsnik. These should be marked STKxxx. These are the convergence ICs and either have bad connections or are defective. If you can solder, try resoldering the pins on these ICs. If that fails to resolve the problem, replace the ICs. There may be other parts that need to be replaced as well. I'll look up your model to find the other parts to check. The convergence board as an assembly, I believe, is no longer available. The parts that you require are available.
Posted on Sep 18, 2008
Tips for a great answer:
Aug 26, 2012 | Sony KP-53XBR45 53" Rear Projection...
Apr 17, 2012 | Sony Televison & Video
Jan 03, 2011 | Televison & Video
Oct 06, 2010 | Sony KP-53S65 53" Rear Projection...
Dec 01, 2009 | Sony Televison & Video
Jun 11, 2009 | Mag Innovision InnoVision XJ 717 Monitor
Feb 10, 2009 | Sony KP-53XBR45 53" Rear Projection...
Jun 14, 2008 | Sony KP-53XBR45 53" Rear Projection...
Apr 07, 2008 | Sony KP-53XBR45 53" Rear Projection...
821 people viewed this question
Usually answered in minutes!