Where can i buy the flex ribbon for my jenson vm-9510

check at shophimmy.com

look up www.flex ribbons cables for sony cd platers . there gots 2 be a a company or 2 out there that wants the money

disassemble your phone by using tools like t6 or t5 screw if you have.. or go to service center.
or you can buy in ebay

http://cgi.ebay.com/Keypad-Flex-Cable-Ribbon-Flat-Connector-Nokia-5610-/280497559417

For Non Touchscreen http://cgi.ebay.com/ebaymotors/JENSEN-Wire-Harness-VM9510-VM-9510-nonTouch-Screen-JE03-_W0QQcmdZViewItemQQhashZitem19bc032a98QQitemZ110528506520QQptZCarQ5fAudioQ5fVideo#ht_3463wt_902




For Touch Screen http://cgi.ebay.com/ebaymotors/JENSEN-Wire-Harness-VM9510TS-VM-9510TS-Touch-Screen-DVD-_W0QQcmdZViewItemQQhashZitem588bfb7934QQitemZ380305635636QQptZCarQ5fAudioQ5fVideo#ht_3150wt_1165

Hi, the problem you are having is with the data ribbon between the screen and the circuit board so you only need to replace the data ribbon for the screen, once you have replaced this your phone should be working once this is replaced, make sure you dont damage anything whilst doing this as the connections can be a bit dodgy,

let me know if you need further assistance ok

try contacting audiovox (audiovox.com)? they own jensen now.

its no fleje, its flex in english or spanish , its the flex ribbon connect the circuit with the screen, i hope this help, suerte.

Buy a new one to replace it: http://www.ownta.com/original-samsung-l760-cell-phone-flex-cable-with-ic.html

ground the parking wire it will work

I Have the wiring harness and can get more of them. Email me @ [email protected] if you want one Jensen vm9510 harness