Maytag M7DH65B2A Dehumidifier Logo
Anonymous Posted on Sep 23, 2011

The unit will not run even though the panel is lit up

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Brigadier General:

An expert that has over 10,000 points.

  • Master 4,736 Answers
  • Posted on Sep 23, 2011
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Brigadier General:

An expert that has over 10,000 points.

Joined: Jan 15, 2011
Answers
4736
Questions
0
Helped
2103418
Points
14643

The problem you're experiencing can be caused by several things:

1. The humidity extraction level is set to HIGH. Lower it to 35%

2. The air intake filter is dirty or clogged. Remove and clean the filter, as necessary.

3. The float valve in the top of the water collection bucket is broken or stuck in the UP position.
Remove the bucket and inspect the float valve for damage and freedom of movement.

4. The water collection bucket is not installed properly. While the bucket is out for checking the
above,be sure to reinstall it "squarely" from top to bottom into the bucket holder. It needs to
make firm contact with the bucket safety removal switch on the rear wall of the bucket holder.

Hope this helps you to troubleshoot & solve the problem. Thanks for choosing FixYa.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a Frigidaire dehumidifer model FDL70S1 that wont stay running for more than 3 minutes and then it shuts the fan off, but still has power to the unit.

Hi lynn crisp, thanks for your post!

From my understanding you are having a challenging time with your Frigidaire dehumidifier shutting too quickly. It sounds like a possible problem with your sensor or control panel. Are you currently under warranty? I would contact your manufacturer for assistance to a proper resolution. -Matt

0helpful
1answer

My machine runs but it does not gather any water even though I know the humidity in the room is high. The humidity displays 60% room and it will not decrease to 35% set, even though the machine is running...

There are 5 basic, but solvable reasons for what you described. Of these 5 you have already completed 2 of them.

1. The humidity extraction level is set to HIGH. Lower it to 32-35%.

2. Air intake filter is dirty or clogged. Turn unit OFF, & Unplug the
Unit, before removing to inspect & clean it, if necessary. If washed,
allow filter to completely dry before reinstalling. DO NOT operate
the unit without the filter.

3. Obstructed air flow. Maintain a minimum of 12 to 18" of clear air
space around the entire unit.

4. Cooling coils are dirty and need to be cleaned. Use warm water & dish washing liquid to
clean the coils. Rinse and wipe dry. Apply a light coating of WD40 to the coils.

5. Ambient air temperature at floor level is between 40 - 60 degrees.
dehumidifiers do not work well between those temperatures
(Unless, you have a Low Temp Unit). This applies mainly to
where the air temperature at floor level is colder than at shoulder level
in basement applications. Raising the unit up off the floor,
onto a sturdy table, counter top, etc, that can handle the weight
of the unit, plus a full tank of water, will usually resolve this
problem.

If none of the above solves the problem, it may be a case of the compressor needs to be recharged with refrigerant gas or that the humidity condenser sensor has failed. These things usually occur in units that are 5 years old or older. It's rare in a unit younger than that. But, it can happen

I hope this helps you to further troubleshoot & solve the problem. Thanks for choosing FixYa.
0helpful
1answer

Why is there no water in my tank even though we have high humidity. The unit is running.

Hi,
There are many reasons why a dehumidifier willnot work or collect water.
Here is a tip that I wrote to help people to figure out what is going wrongwith their dehumidifier

Dehumidifier is running but no water is in bucket

heatman101

;
'';

;'
0helpful
1answer

I have a FDL70S1 Dehumidifier. Unit runs for just a couple minutes and shuts off-blinking bucket full even though no water in bucket. Unit won't stay on

Dont spend to much time trying to repair dehumidifier they are very cheap to replace. Most dehumidifiers have lots of problems because they are made so cheap. Just replace the dehumidifier you will tank me in the end.
0helpful
2answers

My humidifier has stopped dehumidifying while the unit itself is running. It simply does not take the water out of the air even though the motor is running, sensing the humidity of the basement. Is this...

Hi,
There are many reasons why a dehumidifier willnot work or collect water.
Here is a tip that I wrote to help people to figure out what is going wrongwith their dehumidifier

Dehumidifier is running but no water is in bucket

heatman101
0helpful
1answer

Unit wont run but lights up. It reads low humidity even though its high

Hello,

First, make sure the reservoir is empty. If you plug the unit in and see a green power light, but the unit won't run, make sure the reservoir is properly inserted. Many dehumidifiers have switches or sensors to make sure that the reservoir is placed so that it won't leak. Look for these sensors and make sure the reservoir is engaging them. If your dehumidifier has a float or switch to indicate a full reservoir, make sure this switch isn't being tripped accidentally.

Good luck.

0helpful
1answer

Kenmore dehumidifier 580 5370 1300

Hi,
There are many reasons for a dehumidifier2_bing.gif to not work or collect water.
Here is a tip that I wrote to help people to figure out what is going wrong with their dehumidifier2_bing.gif.

Dehumidifier is running but no water is in bucket
http://www.fixya.com/support/r4662409-dehumidifier_running_but_no_water_in

heatman101
1helpful
1answer

The bucket full light blinks even though it is empty and there is "01" in the screen where the digital humidity level is indicated. Pushing the up or down arrow does not change the "01" number. Unit won't...

Take out the bucket and locate the bucket full switch inside the cabinet. Depress the switch and see if it comes on. If so, you may have to add a shim to the bucket or strap it in with a bungie cord as the bucket is jiggling and makes the unit think that it has been removed.
3helpful
2answers

Unit will not run.

Error code 01 - unit has a sealed system leak; most warranties are 5 years.
0helpful
1answer

LG Dehumidifier Not Working

the freon has leaked out, must be replaced.
Not finding what you are looking for?

636 views

Ask a Question

Usually answered in minutes!

Top Maytag Dehumidifiers Experts

Paul Carew

Level 3 Expert

3807 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66772 Answers

goneforever.

Level 3 Expert

14531 Answers

Are you a Maytag Dehumidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...