When I restart my laptop, all i get is a black screen with my cursor...

reinstall windows.. you have a corrupt windows install

Use the integrate mouse and test.

try to open bios menu n select first boot device internal hdd n save the setting n restart.

Hello,

Your computer's operating system just crashes down. What you can do is to do a start up repair. You need the operating system discs which came with your computer during the time when you bought it. It says windows 7 installation/operating system.

Here's what you need to do.

1. Insert the windows 7 operating system disc in the dvd drive.
2. Restart the computer. It will bring you to a page which will ask you to press any key. Just press any key to boot to the installation cd.
3. A blue screen will appear and it will bring you to the page which has the option to install or to repair. Select repair.
4. Then follow the on-screen instructions and finish the process until it restarts.
5. If it does not fix the problem, you have to do a complete/clean reinstallation.

I am providing you a full tutorial on how to do it. Click on the link below so that you will be directed to the link.

http://www.techtalkz.com/windows-7/514412-windows-7-installation-guide-tutorial.html

Thank you for using fixya,

Carlo
var geo_Partner = '82910b1e-9b92-42fd-b83f-fa09a0787ae7'; var geo_isCG = true;

This can happen when there is two problems.. One the computer might have been affected by virus.. Or the other thing might be the OS corrupted.. Try to get into safe mode and check if the system is working fine.. If it works well there try to do a system restore to a place wr it was working well.. If in safe mode also it doesnt work well then go ahead and reinstall the OS...

Get a new OS Installer, I suggest you take Windows 7

Hello my friend, you are experiencing a system hang up. In order to restart your system you'll have to long press the power button on your computer or laptop then do not release it until the computer/laptop will not turn off. If the computer/laptop will turn off check first the system unit tighten the connectors and then restart your computer again. If it won't work then remove the power cable connected on your computer system unit to your avr or Automatic Voltage Regulator.
Thanks 

Hi has your laptop started working again?? removing the battery for 10 min thin puting it back in and restarting will work sometimes

Try restarting the computer.

Reboot into Safe Mode using the F* key procedure.

Go to SYSTEM PROPERTIES / ADVANCED / STARTUP AND RECOVERY / SETTINGS. Uncheck Automatically Restart. (most everyone should do this).

Now uninstall the printer.

Reboot. try again.

Good luck.