Configure DSL-2750U with PLDT - Computers & Internet

Use an Ethernet cable to connect from the port on the DSL modem to the WAN/Internet port on the D-Link modem.

Better contact your network provider
or you have to crack your network your own way if you want
the providers could help you otherwise

DSL-modems do not use PIN codes for WPS access,
unless there is a PIN printed on the bottom of the device.

Your Connectivity may be on Wifi or Lan, ping the gateway and verify gateway IP is up and running if not then try to manually assign the IP to the system and try ping and if there is any proxy Please also remove the proxy from the internet settting and if still problem.Then reset the modem and then also set the IP of your system 192.168.1.2 and access the by default IP 192.168.1.1 and configure the acces point

You need a router which connects to ethernet..ADSL is connected by RJ45(Telephone connection) ... Many cable companies include a router in the Modem (Verizon) others need a router to do wireless which gets connected between the PC and the Modem . the DSL-2750U is well over $2000.00.. a normal wireless router is $50-$100... a regular router gets connected by ethernet to Modem and router ,, then has 4 other connectors .. ehternet to PC.. Also requires power supply. .. wireless has to be setup for the software.

This page gives you how to set up this router, which better called the P-600 series. Zyxel do not recognise it any more.

Default: Username: admin
Password: 1234
Default gateway: 192.168.1.1

http://pctechnotes.com/how-to-configure-zyxel-p-600-series-with-pldt-mydsl/

YES THATS TRUE. TO CONFIGURE THE ROUTER. NEED THE PPPOE USERNAME AND PASSWORD FROM THE INTERNET SERVICE PROVIDER. VPI AND VCI SETTINGS.
..THEN ACCESS THE ROUTER PAGE
..GO TO ADVANCE SETUP PAGE.
..THEN LAYER2 INTERFACE
..CLICK ADD
..CONFIGURE THE SETTINGS.
..POWER CYCLE THE NETWORK.

Reset router. There are two resets. A simple push reboots and holding it in clears all custom settings. Try the first.

This is a quick fix and usually does it. Test with network cable and work your way backwards to modem if you still have problems.

Yes Compatible With my DSL pldt Just setup the user name and password Tel number @pldt
and your password that is your referent number.

if your connection is Dynamic just power cycle the modem and the router

Try set the Edimax router to accept a Dynamic IP from the ISP - cause I guess they provide it to you changed everytime you disconnect.