My 65" samsung turns off when i connect my laptop

The setting are in the control panel. sounds like wi-fi is set to disabled.

take it to the saturn dealership, it could be the starter module or the starter itself, or the ignition lock not recognizing the key, there could be a whole laundry list of things that can cause this. the saturn dealer should be able to figure it out.

Test the vacuum modulator and check the vacuum line going to it. Heat from the exhaust manifold tends to dry up the vacuum hose connected to it. Age takes its toll too on the modulator too.

I assure you they probally picked up on the problem while checking the trans. they would've used the Honda scan tool and checked any engine malfuntions before evaluating the transmission. you can, however, clean the idle/air control valve by removing it from the throttle body and using some air-intake cleaner on it. the cleaner is available at local parts stores. you may also want to clean the throttle plate with the cleaner to insure it is not sticking to cause the idle problem.

You need to replace your ECM (Engine Control Module)....Thats what that code is...

Press the Windows key + P on your laptop.
Or, if that doesn't work, look on your F keys for something that looks similar to a monitor.
Press the FN key and that key.
This should bring up your laptop's display on the tv.

I found someone locally who could tell me where the hardware switch was phyically located. I had thought that this was a software switch, but it's actually a button on the keyboard of the laptop, but it isn't labeled and, since I bought the laptop as a refurb on eBay, I didn't have a user manual to tell me where the switch is located.

plz do not connect the device before the software ask for it.

Nextag and eBay are turning up nothing for this model. In comparison to other manufacturer's prices, the quoted price is not "unreasonable." Projection TV repairs are certainly not cheap. Sorry.

You might have taken the pics in raw mode, to view it u need to install the s/w that came along with your camera. from there u can change it to jpeg.

If this is the problem, then make sure u change this to normal pics in the camera menu.