Question about NetGear WNDR3400 N600 Wireless Dual Band Router (WNDR3400100NAS)
Take a look at the back of the device. there is a tiny hole between the usb and the wifi button. use something suitable to push the button inside (pen, paper clip) and hold 5 seconds (until the power light begins to blink). release the button and wait for the router to boot up and you are with factory defaults settings.
def username is admin
def password is password
def ip address is 192.168.1.1
you can also access the router by typing www.routerlogin.net or .com
there is a link to the manual if you like to learn more
Posted on Sep 19, 2011
You can reset your Netgear router/wireless n600 router to the factory settings from within the router manager. The reset procedure removes all user-configured settings and returns the router to the original factory settings.
For this reason, only reset the router if you encounter problems that can't be solved with other methods.
Step 1: Check that your Netgear router/wireless n600 router is properly connected with your system or not. If it is OK, then press reset button on Netgear router for at least 10 seconds. The 'test' light should flash during this process.
Step 2: Now open browser and enter Netgear's IP address into the address bar. Generally, '192.168.0.1' is the Netgear router IP address but you can find specific IP address in Netgear router manual.
Step 3: Now enter your default username and password to log in to router.
Step 4: Click 'Erase' button under the 'Revert to Factory Default Settings'. This process will erase all your previous changes that have been made to the router and restore the configuration settings to factory setting. Don't interrupt the process until the process is finished.
Once the router's 'test' light has stopped blinking and the configuration page you are on has refreshed, the router has been reset.
Feel free to get instant online Netgear router support at http://www.vtechsquad.com/netgear-router-support/ to fix Netgear router/wireless router issues.
Posted on Oct 15, 2012
For hard reset follow my instructions
> Disconnect all the connected devices with the router.
> Unplug the power cord from your router.
> Press and hold the Reset button for 20 to 30 seconds.
> The Power-light should blink while you're holding the button.
> wait for the power light to stop blinking.
read for more steps https://techvaidya.com/reset-netgear-wireless-router/
this will help
Posted on Dec 29, 2018
Tips for a great answer:
Mar 21, 2013 | Belkin Play N600 Wireless Dual Band Router...
Sep 03, 2012 | Belkin Play N600 Wireless Dual Band N...
Jul 12, 2012 | NetGear N600 Wireless Dual Band Router
See the following articles for more information:
Log in to your NETGEAR router by browsing to http://www.routerlogin.net or http://www.routerlogin.com. Enter the username (admin)and password by default the password is 1234 unless it has already been changed
hope it helps
May 25, 2012 | NetGear N600 Wireless Dual Band Router
May 22, 2012 | NetGear WNDR3400 N600 Wireless Dual Band...
May 13, 2012 | NetGear WNDR3400 N600 Wireless Dual Band...
Apr 04, 2012 | NetGear N600 Wireless Dual Band Router
Nov 21, 2011 | NetGear WNDR3400 N600 Wireless Dual Band...
Sep 04, 2011 | NetGear WNDR3400 N600 Wireless Dual Band...
Feb 27, 2011 | NetGear WNDR3400 N600 Wireless Dual Band...
14,479 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: