I need a pin & barrel for my ESQ ladies watch. The only number I can see is #100671. Thanks, Barb

you need to go to a jewelry place, or walmart, you need a special tool called linkage removal tool. it has one job and only one job and thats all it does removes pins and reinstalls pins
it is a very small press, the shaft of the press is about 1/64 inch

Are they screws?

There are usually two "out" positions, fully out and half way out.

Are you pulling it too far? (if you are, the hands should move when you turn the winder)

Need instruction on how to open clasp on Oceania esq watch?

SEND IT TO ANYTIME WATCH REPAIR. THEY ARE THE BEST!

Take this to a jeweler or pound out the pins with a paperclip width rod of steel or pin pusher and a hammer.

Esq currently only has authorized retailers in Central America, North America, and the Caribbean. You might have to send it to an authorized retailer outside of Europe as I don't believe they have any there. For more info go to their website where you can email then and ask them what they suggest you do as far as getting the watch to them to be fixed.

http://www.esq-watch.com

You can either contact Movado directly (they make the esq watches) or you can ask any REAL jewelry store to contact the company for you and ask about this as long as they carry either Movado or Esq in their store (don't ask the jewelry counter at your local department store).

Type in your browser: 1) ESQ watch bands
2) EQS watches
3) ESQ watch bracelets
4) ESQ watch parts
Try all of these and you will find numerous sites (too many to list here).