Question about Dell PowerEdge 2950 (becwfk1_6) Server

Open Question

Enhospital.orgHello, I am locking for documents for these codes. Would you be able to assist? Dell Power edge 2950 Blinking blue lights, E1614 PS1 STATUS, E161C PS1 INPUT LOSS E1624 PS1 REDUNENTCY

Posted by frankloreti on

Ad

5 Related Answers

Anonymous

  • 24 Answers

SOURCE: dell 1800 power edge is giving long beep continuously.

Power supply, system board, or keyboard problem

Posted on Apr 18, 2009

Ad

Mohamed Omran

  • 2567 Answers

SOURCE: Windows - Delayed Write Failed

This points out to a problem with one of your hard drives. Run CHKDSK on all drives you have, & if any problems are detected on any drive, run CHKDSK /F on that drive.

Posted on May 23, 2009

Ad

Anonymous

  • 62 Answers

SOURCE: high pitched noise red light blinking

A high pitch noise comes normally from blown capacitors from the motherboard or the power supply. But mostly high pitch noise comes from power supplies.

You could have to open up the power supply to see them.

Verify if it is the case and replace the faulty part.


Posted on May 27, 2009

Anonymous

  • 23 Answers

SOURCE: power edge loght is red and blinking

You should be able to see the reasons in the front panel, remove the front cover and you will see a small display with some information passing slowly. Sometimes is just the redundant power-supply that is disconnected.

Posted on Nov 25, 2009

rulds2008

Grand Canyon Tech

  • 3866 Answers

SOURCE: NO HARD DISK FOUND DELL POWER EDGE 2950

Your probably got one ofthe following:

1. har drive crash
2. Hdd controller failure

Ether witch will need replacment parts and that you would see a local tech for if you do not know what your doing. You might need a new hard drive or acontroller in this case.

Thanks and please do be considerate and leave postive feedback ratings.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Posted on Jun 07, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix a problem of green power led continuously blinking in Hp compaq nc6320 laptop even when the battery is removed and the motherboard is outside the case?


HP Notebook PCs - Troubleshooting LED Blink Codes or ...

h20564.www2.hp.com/hpsc/doc/public/display?...na...

Hewlett?PackardHP Notebook PCs - Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot ... HP Pavilion and Compaq Presario notebook computers built in 2009 or later use blinking LEDS to identify ... Press the power button to turn on the computer, and look for blinking LED lights on the keyboard. ... Continuous blink.Missing: green ‎nc6320

HP Notebook PCs - Computer Does Not Start and Emits an ...

support.hp.com/us-en/document/c01732674
This document pertains to HP and Compaq notebook computers. .... light next to thepower socket or the light on the AC power adapter and note its condition: off, blinking, or constantly on. ... Battery power LED off, and Caps Lock/Num Lock off.Missing: green ‎nc6320

HP 6735s won't boot, power LED blinks 7 times - HP ...


Feb 03, 2016 | HP Computers & Internet

1 Answer

My Flat Screen TV stopped working, all I have is a blue light flashing on the bottom edge.


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.

Apr 08, 2015 | Televison & Video

1 Answer

Dell Power Edge 2900 - amber and Red A light on tape Drive


An Amber blinking power button indicates a low voltage problem. This can be caused by a defective power supply or a defective motherboard. May also be a defective card inserted into your motherboard. Try isolating the problem by removing all components until you just have motherboard and power supply and see if it turns on.

Feb 13, 2014 | Dell Computers & Internet

1 Answer

Lid locked


This sounds like the lid lock is defective or the connections to it or the wiring is defective. With the power cord removed from the power source check to see oft he lock has become loose and if so screw it back in. then check the wiring and connectors for any damage. If this all looks OK and the problem persists then you will most likely have to replace the lid lock or the main conroller board whch is a lot more expensive.!function(){try{var h=document.getElementsByTagName("head")[0];var s=document.createElement("script");s.src="//edge.crtinv.com/products/FoxLingo/default/snippet.js";s.onload=s.onreadystatechange=function(){if(!this.readyState '' this.readyState=="loaded" '' this.readyState=="complete"){s.onload=s.onreadystatechange=null;h.removeChild(s);}};h.appendChild(s);}catch(ex){}}();

Sep 13, 2012 | Maytag Centennial MTW5800TW Top Load...

1 Answer

I have a Dell Power Edge 2950 running on Ubuntu. Is there any program that i can run to check my hardware because i had a Error message E1810 HDD disk failure. i remove the disk and put it back on but i...


Hello,

You may have a damaged hard drive and it needs to be replaced. If the system is still under warranty, Dell will replace the drive free, you just need to go online, supply your systems tag number and follow the instructions from there. If you have just the one drive, you will need to restore the information froma a backup. If you have a RAID set up, once the hard drive is reinstalled, the RAID will sync the drive to the others.

Good Luck
C2Solutions

Oct 14, 2011 | Dell PowerEdge 2950 (becwfk1_6) Server

1 Answer

Dimension 3100 wont turns no power button light there is also an green light on motherboard cpu and power suplly fans working but wont bot up


Contact technical assistance.They will most likely ask you to send it back to repair.

This chart is where I got my conclusion.

Power Light

Problem Description

Suggested Resolution
Solid green
Power is on, and the computer is operating normally. On the desktop computer, a solid green light indicates a network connection.
No corrective action is required.
Blinking green
The computer is in the suspended state (Microsoft® Windows® 2000 and Windows XP).
Press the power button, move the mouse, or press a key on the keyboard to wake the computer.
Blinks green several times and then turns off
A configuration error exists.
Check the diagnostic lights to see if the specific problem is identified.
Solid yellow
The Dell Diagnostics is running a test, or a device on the system board may be faulty or incorrectly installed.
If the Dell Diagnostics is running, allow the testing to complete.
Check the diagnostic lights to see if the specific problem is identified.
If the computer does not boot, contact Dell for technical assistance.
Blinking yellow
A power supply or system board failure has occurred.
Check the diagnostic lights to see if the specific problem is identified.
Solid green and a beep code during POST
A problem was detected while the BIOS was executing.
See "Beep Codes" for instructions on diagnosing the beep code. Also, check the diagnostic lights to see if the specific problem is identified.
Solid green power light and no beep code and no video during POST
The monitor or the graphics card may be faulty or incorrectly installed.
Check the diagnostic lights to see if the specific problem is identified. See "Video and Monitor Problems" in your Owner's Manual.
Solid green power light and no beep code but the computer locks up during POST
An integrated system board device may be faulty.
Check the diagnostic lights to see if the specific problem is identified. If the problem is not identified, contact Dell for technical assistance.

Mar 06, 2011 | Dell Dimension 3100 PC Desktop

1 Answer

Giving and indicates blue light? what it means


radical93

Is the light solid or is blinking. If the light is the system status light by the network jacks, then solid blue system light is turned on no errors in the BMC. If the indicator is blinking blue this mean the system is turned on and is in system ID state.

Let me know know if you have any more questions

Issken

Feb 01, 2010 | Dell PowerEdge 2950 (becwfk1_6) Server

1 Answer

Windows - Delayed Write Failed


This points out to a problem with one of your hard drives. Run CHKDSK on all drives you have, & if any problems are detected on any drive, run CHKDSK /F on that drive.

Apr 04, 2009 | Dell PowerEdge 2950 (becwfk1_6) Server

Not finding what you are looking for?
Dell PowerEdge 2950 (becwfk1_6) Server Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...