I am getting a code P1, what does it mean? - Danby DPAC5070 Portable Air Conditioner

Hi Marilyn,
I've just searched for "error code p1 perfect" and the second hit was on fixya in June 2012. Have a look and see what I mean. The easy way to find answers for every product question Just Ask

Amazon.com: Questions And Answers: WHAT DOES THE P1 error code mean??

www.amazon.com/.../ref=ask_dp_dpmw_al_hza?asin...
Amazon.com, Inc.Oct 19, 2014 - Hi David, According to the manual: "P1- Unit is defrosting-- Allow the unit time to automatically defrost. The error will clear after the unit self ...

Empty the bucket. Reseat the bucket carefully or the code will not reset. This is the only documented action for code P1.

1999 civic?
post engine option in car. gas, I4, and displacement
lots of engines, used world wide.
before working on any car or engine, know what's there? first.
P1 means unique to honda, P1 means factory code, P0 means federal generic codes.
did you scan this , or AUTOZONED.?
only 1 code, i too have trouble finding it..... is it correct.?
tell the full story, who got it, and how. and is there any driving symptoms

P1670
Electronic Feedback Signal Not Detected

see list here. (vast)
http://honda-tech.com/showthread.php?t=1739993

that will take a real FSM to find it. ever heard of FSM
or log in to alldata.com and look up 1670s.

there is little info on 1670, googling and ignoring all non honda post.
you must stay on HONDAs only. to get facts. here.

t appears to mean "defrosting." In other words, the condenser coils have gotten too cold and are icing up..


The filter is probably full, or the thermostat is faulty. Open it up and clean the filter first.

According to the manual, this code, P1, means that it is in a defrost cycle. I now have the problem that my unit is in the P1 mode as often as it is in the dehumidification mode.

I have another of their dehumidifiers, the MDF1-30AE. The first time the P1 came on, the unit stopped, because the filter needed cleaning. Recently P1 came on but the unit didn't turn off, and I had already cleaned the filter, so I phoned Midea customer service at 1-866-646-4332. The man told me P1 means it's in defrost mode and said to just leave it on and the P1 will eventually go away. It's been a while though....

The P1 code means the lower water bowl is full.
Put a pan under it an pull the lower plug (some 10" below the upper drain plug that I hope you have a hose attached to.

I heard that the code P1 meant defrosting mode, and it will restart normally after it is done defrosting.