Hoover Nextra HNF 3157 Front Load Washer Logo

Related Topics:

Posted on Oct 31, 2017

Hoover Nextra8 HNF7148 Washing Machine 1) The

Hoover Nextra8 HNF7148 Washing Machine 1) The softener drawer does not take the softener during the cycle, Its always full of water afterwards. Its not blocked! 2) The tumble dryer doesnt get hot at all! 3) I'm fairly sure that, despite what wash is selected, its not heating the water either! I hate this machine....help!

5 Related Answers

Anonymous

  • 1294 Answers
  • Posted on Jan 26, 2008

SOURCE: hoover six express wdm130 1300 washer dryer

Click on your model number above, (below FIXYA) on this site, & search. You will get a shortlist; click on your model, below the page u will get Manual/Guides. Click on the blue, you have your manual on line.
And dont forget to rate me on this great site.

Ad

douglas smith

  • 1462 Answers
  • Posted on May 04, 2007

SOURCE: hoover washing machine top load, model 550m.5.5kg

water leak from cold hose nothing to do with other problem. tighten hose connection and fit a new hose washer overfilling probably because air chamber blocked. remove lid. you will see a pressurestat somewhere at the top - usually round with anything from 3 to 7 wires and a small tube underneath. follow hose down and it connects to the air chamber. make sure this is free of gung and check hose for splits and has no blockage. to check the pressure stat itself, attach your own hose to the stat and while machine in fill mode, blow down this hose and you should hear a click and water intake will stop

Anonymous

  • 1314 Answers
  • Posted on Mar 23, 2008

SOURCE: HOOVER LOGIC 1300

you need to access your drain pump and check it for an obstruction but when you pull the hose off keep in mind it might have a lot of water in it i usually use a shop vac and pull all the water out through the drain hose before removing the hose or opening the pump sorry i cant be more specific but ive never cleaned the pump on a hoover

Anonymous

  • 135 Answers
  • Posted on Nov 15, 2008

SOURCE: water not draing away and machine is not spinning

Empty your machine manually by lowering the drain hose into a bowl or bucket. Then remove the kick plate and check the filter for blockages.Before replacing try the machine on drain to see if the pump is running, if problem persists there may be a blockage in the pipe from the drum to the pump.

orzechoski

  • 77 Answers
  • Posted on May 08, 2009

SOURCE: washing machine

-the conditioner compartment may be blocked
- the cable with spring that change course of the water may be out,

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

Why does my Samsung washing machine discharge the fabric softener before the washer has added the water?

The addition of the softener is dependent on the level of the liquid in the drawer.
If you add too much softener to the drawer compartment then the liquid will immediately flow into the drum of the machine, you need only to add softener up to or preferably just below the line marked in the compartment. Also, if you slam the drawer shut then a wave of softener level may cause it to flow into the machine before the start of the program.
0helpful
1answer

Dispenser fabric softener slot

Fabric Softener Compartment Full Of Water - White Goods ...

www.whitegoodshelp.co.uk > ... > DIY Washing Machine Repair Help
Jul 9, 2013 - The small fabric conditioner compartment in the soap dispenser drawer has a plastic cap or tube at the back for the water to siphon up through. ... Make sure the washer is level front to back as well as side to side. .... If the washing machinehasn't been used since there's always the possibility that the plastic ...

The fabric softener part of my washing machine drawer keeps ...

www.mumsnet.com > Topics > Housekeeping

MumsnetAfter each wash, the fabric conditioner part of the drawer is f. ... The fabric softener part of my washing machine drawer keeps filling with water ... Stopped using thedispenser compartment for fab softener and instead did I separate ... see if that clears it up and also try cleaning behind the drawer in case there is a blockage.

Washing Machine ' Fabric Softener ' Problem ' Won't Empty


0helpful
1answer

Hi I am experiencing a problem with my hoover washing machine, when the machine is turned on it is not taking the powder from the drawer or filling with water?. It is a Family 1300 mega load hope you can...

There are a few reasons that you are having this problem.

It's possible that the hose that supplies the water is blocked. If the drawer and powder are totally dry, the solenoid that supplies the water to the detergent drawer may be bad. Some machines use hot water to dispense the detergent and cold water to dispense fabric softener, so both must be available to that type of machine regardless of the wash/rinse temperature selection.

I'm not familiar with Hoover. If you open the drawer and see a tab that stops the drawer, depressing the tab may allow the drawer to be removed and cleaned at a sink. They are not dishwasher-safe and must be cleaned by hand.

If this does not help, please repost your question.

Good luck from Detroit, MI, USA.
0helpful
1answer

What tray is what for a Hoover nextra washing machine?

Hi from retired Englishman in SW France,
A quick and easy way to find out which tray is which is to pull the detergent drawer out just so that you can see into it. Start a pre-wash and see where the water runs in, then advance to the main wash and observe. Finally start a rinse cycle and where the water goes in is where the conditioner/softener goes.
In a few cases I have come across, the pre-wash tray shares with the conditioner/softener part but the pre-wash powder goes in the front and the softener in the back.
Methinks you could also do with a manual!
You will need to type into your search engine/web browser '(make) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount. During the process you will be asked for the actual model number!
Good luck,
John C.
0helpful
1answer

The fabric softener will not dispense into the machine

Will be dirt in the drawer, take it out give it a good clean make sre the small tube is cleaned too if it has one/.
0helpful
2answers
3helpful
3answers

The pump on my hoover washer hnf7148 has been changed but the problem persists. Water is still in the drum and it will not drain away. The control panel when the machine stos shows the door closed with...

This particular model has a problem with the circuit board(control board,PCB) it does everything but drain, its very easy to replace and costs around £52
Not finding what you are looking for?

139 views

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...