Question about RCA D52W15 TV

1 Answer

Rca hd model #d52w15

Tv wont come on power button comes on for a few seconds then goes off if i hold the button it flashes a code of 19 i flash then nine after the pause does anyone have any idea what could be going on or could guide me in the right fix thank you for all your help and sugg clint

Posted by clint shelton on

  • 3 more comments 
  • Anonymous Jan 05, 2008

    The power button will no longer come on.

  • Anonymous Apr 30, 2008

    I NEED THE SERVICE MANUAL TO IN TO THE SERVICE MODE OF D52W5B, PLEASE HELP ME.

  • Anonymous Oct 30, 2008

    My D52 (Mfg. in 2003) started just shutting off by itself and then turning back on again by itself a few seconds later about a week ago. Then a few days later, it just shut off by itself and stayed off until I turned it on again manually. Then it started taking longer and longer after it shut off by itself before I could turn it back on again. As of last night, it shut off after being on only 1/2 hour and when I tried to turn it on again, only green wispy "smoke like" images appeared for about 10 seconds before it turned off. Now it does that every time I try to turn it on. Can anybody please help?

  • mark2004 Nov 08, 2008

    when I turned on by remote the tv. It turns the led green and no picture it happen for about 20 sec and then shut off. Can you help me?

  • Anonymous Mar 15, 2014

    power button comes on no picture our sound

×

Ad

1 Answer

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

That flashing means that the sweep power supply didnt start up along with the main power supply. It could be a shorted horizontal output transistor or a bad flyback transformer. Youll need a service manual to scope out the horizontal drive and see why itsnot starting up or staying on. if your not a servicer then there are no real user serviceable parts inside so contact your local AUTHORIZED servicer as they will have all the right service manuals as well as acess to all the proper parts. Not that an unauthorized shop is a bad thing its just they the unauthorized usually are not aware of troubles that rca sends there peeps. Good Luck

Posted on May 28, 2006

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code number to program my bell remote to this tv


01768,11034,11265, 10178, and 11748.
Or you can:
1. Press "TV" button
2. Hold "P" (program button) till the "TV" button flashes once then twice
3. Enter 9 9 1, and the "TV" should flash twice
4. Aim the remote at the TV and hold the Power button down for at least 3 seconds. (Remote automatically goes to first code but it probably wont work so go on to step 5)
5. Press CH+ repeatedly till the TV shuts off and stop immediately!
6. Hold "P" for 2 seconds
7. Hold "Select" for 2 seconds
8. Hold "P" for 2 seconds
9. Hold Power for 2 seconds and TV should turn back on
Found at:http://wiki.answers.com/Q/What_is_the_universal_remote_code_for_a_haier_tv
Be sure to rate macapplezoo 100% or whatever you think I deserve!

May 29, 2011 | Haier HL32D1 32 in. TV

2 Answers

"on" light flashes twice and then "blacks out"


IF power light comes on and a few seconds later goes off, do the self check this model has.

On front of set when this happens, press and hold both the menu and input (device) buttons at the same time for at least 5 seconds and then release both buttons.

Watch the power light closely, it should blink a two digit error code like; 2 blinks, 2 blinks, a pause and then repeat it several times.

Let me know what error code you find and I will tell you what it means.

SD TECH

Dec 11, 2010 | Mitsubishi WS-65909 65" Rear Projection...

2 Answers

Power will not come on even after system reset. Pushed reset and LED flashes then after it stops flashing TV will still not turn on.


do self check: when it shuts off and power light goes off:

On front of set press and hold both menu and input (device) buttons for at least five seconds and release both buttons.

Power light will blink a two digit error code, like 2 blinks, 2 blinks, a pause and repeat it several times.

Let me know what error code and I will assist you


SD TECH

Sep 24, 2010 | Mitsubishi WS-55513 55" Rear Projection...

1 Answer

Mitsubishi projection tv picture and sound turn off but the power button remains on with no picture or sound turn tv off real quick and then back on and works for 2 mins then turns off again what could be...


Here's the basic troubleshooting:

  1. Make sure that no front panel buttons are inadvertently stuck in an "engaged" position.
  2. Disconnect ALL devices from the TV.
  3. Press the SYSTEM RESET button and hold for 10 seconds. Proceed if the problem still exist.
  4. Press and hold POWER and MENU buttons simultaneously for 20 seconds. Proceed if the problem still exist.
  5. Unplug the TV from it's power source for various times, ranging between 5 minutes and 24 hours.
  6. If it still shuts down, press the DEVICE and MENU buttons on the front panel simultaneously and hold it for 5 seconds to activate the Error Code Operational Check. The status LED indicator will then flash denoting a two digit code.
  7. Count the number of flashes then pauses for about a half second then flashes again. The first number of flashes indicates the first digit of the error code and the second number of flashes indicates the second digit of the code. For example, if the error code is "35", the LED will flash 3 times, pauses, then flashes 5 times. The error code is repeated a total of 5 times.
Please let me know the code you got and I'll tell where the problem lies and how to fix it.

Dec 01, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

When I turn on the tv the light comes on then goes off in about one second. is it possible to fix a problem like that myself


We would need the error code. On the front of the television, press and hold the MENU and the DEVICE buttons at the same time for about 10 seconds. The power LED will start flashing. Count the number of flashes between pauses and then write us back with the error code.

Aug 09, 2009 | Mitsubishi Televison & Video

1 Answer

Mitsubishi 50111


Run the diagnostics.

With the TV power cord plugged in, press the 'INPUT and 'MENU' buttons at the same time -- use the buttons on the front of the TV, NOT the buttons on the remote; a diagnostic Error Code Operational Check will begin, utilizing the 'POWER ON' LED (the green 'POWER ON' indicator light).

There will be a pattern of two sets of flashes, with a pause in bewteen flashes; this sequence of flashes will be repeated a total of five times.

The Error Code designations are listed below:

Error Code Description
12 No eror has occurred.
21 X-Ray Protect circuit.
22 Short Protect circuit.
23 Horizontal Deflection failure.
24 Vertical Deflection failure.

I hope this information helps.

Jun 17, 2009 | Mitsubishi VS-50111 50" Rear Projection...

2 Answers

RCA HDTV #D61W20, CHASSIS ITC222, Power button flashing 1, pause, 9. Possible error code 19, anyone know what this means


This is not a friendly chasis, the only easy fix that you might check on the power supply board and the left side (looking from the back) 3 capacitor (220,330,and 2200uf 16V) have the top pop up. Other than that poping, arcing noise, burn smell when first start up is bad york, Flyback Transformer and even the cooling leak for those tubes you will need professional TV repair man. Those TV picture not very nice anyway.

Nov 07, 2008 | RCA D61W20 61" Rear Projection Television

2 Answers

Sony KDP-65WS550 flashes when you try to turn it on


No the DLP units can flash more than 8 times. 9 blinks mean Zero Crossing detector which means diode number D6166 or D6114 is open they are on the A board.Let me know if you need any further info.

Feb 23, 2008 | Televison & Video

15 Answers

Tv won't stay on


My tv is a Toshiba. It comes on for a second and then goes off by itself. I use the remote and the power button on tv and the same thing happens. Is there a solution to this?

Jan 24, 2006 | RCA F27450 27" TV

Not finding what you are looking for?
RCA D52W15 TV Logo

Related Topics:

1,080 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76544 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Cindy Wells

Level 3 Expert

6242 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...