My check engine light,vsc light and trac off light are on and the car is idleing rough. It sounds like it may be misfiring on a cylander.

Year/make/model??? P0015 is a camshaft position sensor code and P0017 is a crankshaft position sensor code ( generically ). The computer most likely disabled the traction/Vsc as a safety related operation. It is possible the heavy rain may have caused an electrical issue within the wiring/sensors. I would suggest having the codes cleared and continue driving and monitor the engine light to see if these codes return. Ir they do, further diagnostics will be required

Check engine light, VSC TRAC & TRAC OFF lights - Toyota ...

www.toyota-4runner.org/.../4164-check-engine-light-vsc-trac-trac-off-li...
Jun 6, 2004 - I just bought it, and a few days later the check engine light, VSC TRAC, and TRAC OFF lights all came on. I took it to a dealership and was told ...

VSC and TRAC OFF lights came on? - Scion xB Forum

1. Traction Control System Problems - Car Forums and Automotive Chat ...

   www.automotiveforums.com > ... > Toyota > SequoiaTraction Control System Problems Sequoia Car Forums. ... The VSC/ATRAC indicator lights are staying on and the system will inadvertantly ..... giving a bad reading following the replacement of the steering angle sensor with a new one.

That code relates to a crankshaft position sensor signal. It you have a check engine light come it disables the VSC and Trac system. Until you get that sensor fixed the VSC and the TRAC system will be inop. So whenever you have a check engine light come on that is what you will see. Even though you cancel the check engine light the fault still exists and the VSC/ TRAC light will come back on. That is a sure way to tell that something is wrong.

Hello, the vsc/trac lights will turn on whenever the check engine light turns on first, this is a fail safe function,vsc and trac are disabled as soon as the check engine light turns on so the check light needs to be diagnosed first, you will need to have the onboard computer scanned for diagnostic codes for the engine control system, these are usually a letter fllowed by some numbers, for example a P0301 code would be an engine misfire on the #1 cylinder. If there is an Autozone store or other autoparts vhain store like advance auto, pep boys etc give them a call and take the truck there, they usually help you get the trouble code numbers at no charge, after you have this information post a follow up with the results and I can help you with a solution.

You need to have the ecm scanned for codes. The VSC and TRAC OFF lights are one just because the Check engine light is on. Once you clear the code in the ecm they will go off too.

Battery was diconnected for 1 minute and then reconnected. All lights are off.

2000 toyota highlander just had oil changed and VSC lightis on.
what to do

go to auto zone, advanced autoparts, or a certified mechanic and ask if they can reset the codes, it should be free

you need to have the computer reset.