Dear sir, when i start the pc, the monitor is black. cunsulted with a technician and he said it is the same with other monitor. so he think problem will be in PC not monitor. The exhaust fan of the PC is working. pls advise regds

Hope this helps.... Your monitor has an inverter issue. You know it's an inverter problem when:
1. Your monitor starts normally and displays the startup/desktop screen for a while.
2. Then it suddenly goes off, leaving a blank (black) screen or a very dim display.

To fix this black screen problem, change the inverter board (based on your monitor brand). Source(s): http://lcdmonitorrepair.annics.com

Dear Sir,

This problem is not from monitor side,check computer RAM.Clean it twice and reinstall it on place.If you are using VGA card then disconnect it from PCI slots and connect VGA cable to on board VGA . I think it solves your problem.Let me know

> after getting Internet connection of my PC, that trouble came.

That probably has _NO_ affect on your LCD monitor.

You could either:
* live with the problem, spending NO money
* spend $50 to $75 for a TV/audio/video technician to try to fix it
* spend $50 to $75 to buy a used 17" LCD monitor
* spend $100 to $150 to buy a new 19" LCD monitor

You might need to change the screen refresh rate. Go do Control Panel> Display> Setting> Advance, choose 60 Hz. In order to make your Monitor able to display, restart the PC, press F8 on the keyboard frequently upon splashing ( 1 or 2 seconds after PC restarts). Select enable VGA mode by pressing up arrow of the keyboard> press enter. The display should look bigger, then you can start adjusting the screen refresh rate to 60 Hz

Dear sir,
Ur display screen can be repaired by skilled technician , i thinks its LCD enegising circuit is not working at all .

I think this problem appear video o/p section.Dry solder Pl. solder video output section

try starting in safe mode, by pressing F8 when the computer first starts up keep pressing it, click, click, click not holding. then goto display setting in control panal, and change your monitor type, if you can't find your monitor listed use a defult 800X600 one. it sounds like your monitor is not capable of displaying the resolution xp wants to use.

dear sir

i think u have screen resolution pro.

change your system resolution to 800x600 .reso.then restart .
i think your problem is solved

check the brighness and contrast of the monitor from the menu button ... try giving reset ....


if same problem persists then the monitor CRT tube may be gone
jsut go expert technician and tell the problem...
if so the technician will recharge the tubes...

If the menu is appearing then it should be able to adjust the Monitor, provided you have replaced the micro switches. Check for continuity by pressing the buttons. I don't think that there is any prolem with other components.