Classification of human scheme - Home

ask them we are NOT them nor are we in Africa.

google finds them first hit, ever google before?
time to start.

Our mission is to transform NSFAS into an efficient and effective provider of financial aid to students from poor and working class families in a sustainable manner that promotes access to, and success in, higher and further education and training, in pursuit of South Africa's national and human resource development goals.

The National Student Financial Aid Scheme (NSFAS) was established in terms of the National Student Financial Aid Scheme (Act 56 of 1999).

i'd start by rechecking the "MDS on" install to make sure all connectors near where you were working are well seated. also recheck where the previous harness would contact. i find it really hard to beleive that the old harness was too short. improperly routed perhaps, but too short???

U0154 - LOST COMMUNICATION WITH OCM (occupant classification module)

• When Monitored:
• With the ignition on
• IOD fuse installed
• FCM is configured correctly
• Set Condition: Bus messages not received from the Occupant Classification Module for approximately 2 to 5 seconds.

Possible Causes
CAN B BUS CIRCUITS OPEN OR SHORTED
DTCS RELATED TO BATTERY VOLTAGE, IGNITION, OR VIN MESSAGES
FCM NOT CONFIGURED CORRECTLY
OCCUPANT CLASSIFICATION MODULE
OCCUPANT CLASSIFICATION MODULE POWER AND GROUND
MODULE THAT SET THIS DTC


OCM is located under passenger seat. make sure it's connector isn't loose.

If you need further help, reach me via phone at https://www.6ya.com/expert/marc_162a3912222e83a4

maybe this will help:

Class I laser product means any laser product that does not permit human access during the operation to levels of laser radiation in excess of the accessible emission limits as defined in Table I of 21 CFR Subchapter J Part 1040.10. Class I levels of laser radiation are not considered to be hazardous.

Class II laser product means any laser product that permits human access during operation to levels of visible laser radiation in excess of the accessible emission limits contained in Table II-A of 21 CFR Subchapter J Part 1040.10, but does not permit human access during operation to levels of laser radiation in excess of the accessible emission limits contained in Table II of 21 CFR Subchapter J Part 1040.10. Class II levels of laser radiation are considered to be a chronic viewing hazard.

Class IIIa laser product means any laser product that permits human access during operation to levels of visible laser radiation in excess of the accessible emission limits contained in Table II of 21 CFR Subchapter J Part 1040.10, but does not permit human access during operation to levels of laser radiation in excess of the accessible emission limits contained in Table III-A of 21 CFR Subchapter J Part 1040.10. Class IIIa levels of laser radiation are considered to be, depending upon the irradiance, either an acute intrabeam viewing hazard or chronic viewing hazard, and an acute viewing hazard if viewed directly with optical instruments.

Class IIIb laser product means any laser product that permits human access during operation to levels of laser radiation in excess of the accessible emission limits of Table III-A, but does not permit human access during operation to levels of laser radiation in excess of the accessible emission limits contained in Table III-B of 21 CFR Subchapter J Part 1040.10. Class IIIb levels of laser radiation are considered to be an acute hazard to the skin and eyes from direct radiation. Class IIIb laser products may have removable panels that, when displaced, permit access to levels of laser radiation ranging from Class II to Class IV.

Class IV laser product means any laser that permits human access during operation to levels of laser radiation in excess of the accessible emission limits contained in Table III-B of 21 CFR Subchapter J Part 1040.10. Class IV levels of laser radiation are considered to be an acute hazard to the skin and eyes from direct and scattered radiation. Class IV laser products may have removable panels that, when displaced, permit access to levels of laser radiation ranging from Class II to Class IV.

The ring-necked snake or ringneck snake, Diadophis punctatus, is a species of colubrid snake found throughout much of the United States, central Mexico, and southeastern Canada. Ring-necked snakes are secretive, nocturnal snakes, so are rarely seen during the day time. They are slightly venomous, but their nonaggressive nature and small, rear-facing fangs pose little threat to humans who wish to handle them. They are best known for their unique defense posture of curling up their tails, exposing their bright red-orange posterior, ventralsurface when threatened. Ring-necked snakes are believed to be fairly abundant throughout most of their range, though no scientific evaluation supports this theory. Scientific research is lacking for the ring-necked snake, and more in-depth investigations are greatly needed.[3] It is the only species within the genusDiadophis, and currently 14 subspecies are identified, but many herpetologists question the morphologically based classifications. Diadophis punctatus

The main three classifications of science( as per academic) are the following:
Physics
Chemistry
Biology( Botany and Zoology)
In common we have different classifications too..
computer science
social science.. etc..

Lubricants and capacities
Engine oil options
Ambient temperature range Cold climate
Engine oil grade SAE 5W/30
Engine oil classification API/ACEA SJ/A2
Ambient temperature range Moderate climate
Engine oil grade SAE 10W/30
Engine oil classification API/ACEA SJ/A2
Ambient temperature range Moderate climate alternative
Engine oil grade SAE 10W/50
Engine oil classification API/ACEA SJ/A2
Ambient temperature range Hot climate
Engine oil grade SAE 10W/40
Engine oil classification API/ACEA SJ/A2
Engine with filter(s) litres 4,5