1.call comcast and ask them to put your modem on bridge mode.
2. Once the modem is on bridge mo the internet light will turn OFF
3. connect your comcast modem using the Ethernet cord to the Internet port at the back of your netgear router.
4. connect another ethernet cable from port number 1 from the back of your router and the other end should be connected at the back of your computer.
5. Then go to this website for the instruction to configure your netgear router. it includes screenshots as well for better understanding.
ftp://downloads.netgear.com/files/rp614v3_setup_manual.pdf
To Configure the Router with Internet Access
Connect to one of the wireless router/access point's LAN Ethernet ports, turn off its DHCP server, and give the wireless router a static IP on your LAN:
102 views
Usually answered in minutes!
×