Question about Jensen Q2749J 27" TV
Hold down the display button for a few seconds
Posted on Mar 12, 2007
If you have problems with the remote control rc-a26-oc and your tv displays a lock and blue screen. turn tv on hold display button on remote control until screen turns black turn tv off and on again and that should do it :)
Posted on May 01, 2007
I have an Apex TV the model # is AT2702. I turned My TV back on and all there is, is a blue screen with a picture of a key in the bottom left hand corner. I can`t get any picture or any sound. I am locked out of my TV and I don`t know what to do. Please Help anyone if you can. I need my TV.
Posted on Jun 30, 2009
It depends what you mean by locked. If you mean the remote simply won't do it's job anymore it could be the batteries in the remote have died. I've come across a TV in Canada whilst on holiday which suffered remote lockup after a small boy had pressed about every button possible and some at the same time. What I did there was turn off the TV, pull the plug and sit down for a chat and coffee. An hour later I turned the TV back on and all was well which was more than could be said of said of the boys eardrums. BMW
Posted on May 14, 2006
Ithink that you should order a cable guy
Posted on Sep 26, 2008
It it was a universal remote, he could have pressed one of the buttons to switch it over to control VCR or CABLE, etc. Simple solution: press the TV button and try to control the tv with it. Regardless, the buttons on the tv should work.
Posted on Apr 27, 2007
Tv screen is blank only thing on tv is a key in lower left corner,i can't turn tv none of the controls seem to work. tried turning off for a while but the only picture i get is a blue screen and a key in lower left corner.
Posted on Apr 23, 2007
Find the instruction or user manual and look up in the menu and see what type of Prental controls it has and how you unlock thewm as all sets are a bit differant. or try calling the manufacturer at the # given. Sorry I cant assist you any better but as I said theres a differance with every type of set. Good Luck 888-866-5487
Posted on May 14, 2006
SOURCE: TS2050J TV (Jensen) locked. How is it unlocked?
Thank you following up. None of the solutions or codes you recommended worked. So I drove to mother's old house and went through things until I found the manual (bedroom bookcase, bottom shelf, under bridge books and old papers). The manual said to hold the display button down 3 seconds. I then drove to mother's new place (assisted living) and tried that. It worked.
Posted on Sep 28, 2008
SOURCE: Unlocking the parental control
how do you unlock your parental controls?
Posted on Dec 06, 2008
SOURCE: tv is lock
i picked up the remote control an it lock the tv so i unplug it to try to rest it an u can turn it on at all
Posted on Apr 06, 2009
•
Look at the screen. If you see a red key on the bottom of the screen,
press "Function" and "Mute" on the remote at the same time.
This will unlock the channel. Do this if you want to bypass the lock to watch a
certain show or channel while leaving the TV locked. All other channels will
remain locked and the TV will lock again when it is turned off.
• Unlock all of the channels on the TV by
entering 0711 or 3308. These are the Jensen factory reset codes that will reset
the TV to the original factory settings. By doing this, you will loose any
information that you have stored in the TV, such as channel labels and
schedules. You will have to program the TV again by going through the entire
initial set up.
•Call the technical support service number
in your owner's manual if neither of those codes work. A technician can help
you troubleshoot the television as the problem may not be the parental lock
feature. Have the model number and serial number of the TV available when you
call.
• Take your television to a TV repair shop if
neither of the codes work and the TV locked by itself while it was turned on.
In this case, the TV may need to be rewired.
•
Look at the screen. If you see a red key on the bottom of the screen,
press "Function" and "Mute" on the remote at the same time.
This will unlock the channel. Do this if you want to bypass the lock to watch a
certain show or channel while leaving the TV locked. All other channels will
remain locked and the TV will lock again when it is turned off.
• Unlock all of the channels on the TV by
entering 0711 or 3308. These are the Jensen factory reset codes that will reset
the TV to the original factory settings. By doing this, you will loose any
information that you have stored in the TV, such as channel labels and
schedules. You will have to program the TV again by going through the entire
initial set up.
•Call the technical support service number
in your owner's manual if neither of those codes work. A technician can help
you troubleshoot the television as the problem may not be the parental lock
feature. Have the model number and serial number of the TV available when you
call.
• Take your television to a TV repair shop if
neither of the codes work and the TV locked by itself while it was turned on.
In this case, the TV may need to be rewired
Turn
on the TV and grab the remote. In most cases, you will need the original remote
to unlock the TV if you aren't sure of the unlock code. If you don't have the
original remote, you will need to purchase one.
Look
at the screen. If you see a blank screen with a red key on the bottom of the
screen, press 'Function' and 'Mute' at the same time. This should unlock the
channel. This is an option for people who want the TV to stay locked but, want
to be able to bypass the lock to watch a certain show or channel. All other
channels will remain locked and the TV will fully lock when it is turned off.
Unlock
all of the channels on the TV by entering the factory reset code. There are
three main reset codes that TV manufacturers set. These are 0711, 6688 and
3308. Try each one until you find the one that works. This will reset the TV to
original factory settings. When you do this, you will loose any information
that you have stored in the TV, such as favorite channels, automatic timers and
the clock. You will have to go through the full initial set up.
Call
the technical support service number in your owner's manual if none of those
codes work. A technician can help you troubleshoot the television because the
problem may not be the locking control. When you call, make sure that you have
the model number and serial number of the TV.
Take your television to a TV repair shop. In some cases, a professional who access to wiring diagrams for your television set may have to rewire certain components in order for the television to unlock. This is usually the case when the TV locks by itself while it is on.
1. Turn on the TV using the remote control. In most cases, you will need the original Jensen remote to unlock the TV if you aren't sure of the unlock code. You can purchase an original replacement online if necessary.
2. Look at the screen. If you see a red key on the bottom of the screen, press "Function" and "Mute" on the remote at the same time. This will unlock the channel. Do this if you want to bypass the lock to watch a certain show or channel while leaving the TV locked. All other channels will remain locked and the TV will lock again when it is turned off.
3. Unlock all of the channels on the TV by entering 0711 or 3308. These are the Jensen factory reset codes that will reset the TV to the original factory settings. By doing this, you will loose any information that you have stored in the TV, such as channel labels and schedules. You will have to program the TV again by going through the entire initial set up.
4. Call the technical support service number in your owner's manual if neither of those codes work. A technician can help you troubleshoot the television as the problem may not be the parental lock feature. Have the model number and serial number of the TV available when you call.
5. Take your television to a TV repair shop if neither of the codes work and the TV locked by itself while it was turned on. In this case, the TV may need to be rewired.
OK.
1. Turn on the TV using the remote control. In most cases, you will need the original Jensen remote to unlock the TV if you aren't sure of the unlock code. You can purchase an original replacement online if necessary.
2. Look at the screen. If you see a red key on the bottom of the screen, press "Function" and "Mute" on the remote at the same time. This will unlock the channel. Do this if you want to bypass the lock to watch a certain show or channel while leaving the TV locked. All other channels will remain locked and the TV will lock again when it is turned off.
3. Unlock all of the channels on the TV by entering 0711 or 3308. These are the Jensen factory reset codes that will reset the TV to the original factory settings. By doing this, you will loose any information that you have stored in the TV, such as channel labels and schedules. You will have to program the TV again by going through the entire initial set up.
4. Call the technical support service number in your owner's manual if neither of those codes work. A technician can help you troubleshoot the television as the problem may not be the parental lock feature. Have the model number and serial number of the TV available when you call.
5. Take your television to a TV repair shop if neither of the codes work and the TV locked by itself while it was turned on. In this case, the TV may need to be rewired
OK.
1,409 views
Usually answered in minutes!
lost the password toget into parental controls looking for reset.
my son hooked up his video game to the tv then the screen went blank and all the was/is there is a little red key in the bottom left hand corner please help me
I forgot the parental password and now I can not turn it off
hi i am from chennai my tv 3options
1.tv lock
2.panal lock
3.chlid lock
i am preesing{ tv lock} on and tv swicth off
and not disply and any reactions plys help me every body thank you all
Hi, I am having the same problem. I am not sure what i pressed on the remote control but my tv has a lock on it and I am not able to access any channels. Please help me.
I can not get my tv to show a picture but there is sound it is asking for my code which I don't remember. do you have a suggestion?
×