NEC AccuSync 900 19" CRT Monitor Logo

Related Topics:

Juan Thib Posted on May 12, 2006
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

NEC ACCUSYNC 900

My colors on my monitor are perfect for a while when I first boot, then it begins to flicker and develops a pink tint. It goes back and forth to being okay then pink-tinged. I have an integrated video card that was supposedly repaired by the manufacturer. Before I sent it in, tech support made me install a stand-alone video card twice, but found them to be defective. Well, I sent it in and it still continues to change colors. Can an integrated card be fixed? Or is it my monitor? Please help before I send it off again! Thanks, thib9417

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Master 3,130 Answers
  • Posted on May 12, 2006
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: Mar 22, 2006
Answers
3130
Questions
5
Helped
1641441
Points
8439

Havent you got a person or a friend that has a puter to test the monitor??? This would be the best way as it could be the crt on the monitor or the crt driver board but before we go there we should make sure where the problem lies. Good Luck

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Can't red and green colors

This usually means the red or green or both primary color module is bad. Monitors come with 3 primary color module controllers and they use them in various combinations to make the other colors. The primary colors are blue, green, and red.
0helpful
1answer

Large screen

try clciking auto on screen or downlaod grathics drivers eg intel grathics , then u can change from there
0helpful
1answer

Help me please

Try this link, I am asumming you have the AccuSync LCD71VM monitor, I don't know what a n4 ibfgl is. But here is a link to nec that might help you...
http://www.necdisplay.com/SupportCenter/DriverFinder/

Download the file NEC LCD MONITOR Installer.
Hope this helped you..THK
0helpful
1answer

NEC flat screen monitor reset screen keeps popping up.

Call 800 836 0655 and ask for directions from tech support.
1helpful
2answers

Computer Screen

Check the screen settings resolution in your computer

Start >> Control Panel >> Display

Reset your monitor to factory settings.
8helpful
2answers

Pink tint on Dell 1704FPT Flatpanel LCD

Unfortunately if you have tried a different machine (it could be a bad video card) and tried the cables most likely it is the screen itself. Typically when one of these lcd's begin to fail the pixles no longer access the blue field and you see mostly red instead of the other two colors. In short pink screen is terminal, it will last for a while longer.
0helpful
1answer

Monitor flickers, color turns pink

This has happened to me before, seems when AVG is running is when it is noticable. After playing with the settings and doing a lot of googling and reading, my fix this time was to update the driver for the NEC monitor. It's working great for now.
0helpful
1answer

Chimei CMV 938D 'Out of range' error message only when using DVI Connector on specific resolution and color depth

I know this sounds obvious but- I had the same problem, and turns out the cord want plugged in quite properly at the back of the monitor. This may not fix every problem, but, I suggest you check the cord pligged in at the back of the monitor is firmly in there and restart, then if you still get the problem, contact the company.
0helpful
1answer

Nec flat screen goes blank after 20 seconds

i got the same prob.supposedly its the cap(capacitor) ,the one for the power suppy near the cord input.im getting my shit fixxed.and i will let you know.
Not finding what you are looking for?

137 views

Ask a Question

Usually answered in minutes!

Top NEC Computers & Internet Experts

Steven Wander
Steven Wander

Level 3 Expert

599 Answers

Cindy Wells

Level 3 Expert

6677 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39127 Answers

Are you a NEC Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...