Polaroid PhotoMax PDC 4350 Digital Camera Logo

Related Topics:

Question about Polaroid PhotoMax PDC 4350 Digital Camera

1 Answer

Why does my memory card not click into place?

My memory card has been fine for the last year but all of a sudden it will not go back into the camera, is this because of the spring in the camera itself? If so who should I take the camera to?

Posted by becky dobbins on

  • kfordyce Feb 02, 2008

    The card will not lock in the camera. It pops out as in constant eject from camera.

  • Perry Marsh Jul 23, 2008

    My memory card has been fine for the last year but all of a sudden it will not go back into the camera

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

Hi: What do you mean with "it will not go back into the camera"? Do you mean that the camera cannot read the card? Or do you mean that the card doesn't fit anymore? If the problem is the reading of the card in the camera ask yourself if you carry a mobile with you near the card... that can make the card to stop working :) If the problem is the second choise you have to see if the card is ok or the place where you insert the card. It can be damaged with a fall or something... Regards

Posted on May 10, 2006

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I am using this camera from last 3 years. It was working fine. Suddenly, a problem occurred. Now whenever I select the Auto mode, it is set to video option instead of still image. I have formatted...

I'm have the exact same problem. Purchased the camera 3.5 years ago. Recently needed to shoot a video, when finished I set the camera back to Auto and it stayed in video. Portrait mode shows manual, all other modes work as assigned. I've noticed at least TWO other posters having the same problem within the last couple of months. It's as though this camera (mfg. 2007) has a Trojan program from the factory to make us buy newer models.

Other than resetting, is there a way to flush and reload the firmware?
0helpful
1answer

Camera will not format Memory Card. When I turn on the camera it states, Momory card requires formatting. When I try to format it says it is formatting but then goes straight back to the original message...

  • Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com
  • 2 Open up 'My Computer'. You should see it under the list of available drives.
  • 3 Check its contents first to make sure that you have the right drive.
  • 4 In 'My Computer', right-click on the drive and choose 'Format'.
  • 5 Leave all the options as they are and click on 'Start'. This is a non-reversible process so make sure this is what you truly wanted to do in the first place.
  • 6 Once the process is completed, take the memory card out and insert it into your Digital Camera or any other device. Try to browse to it to make sure it works fine now.
  • 2helpful
    2answers

    Camera turns on and focuses, but cannot see menu or take pictures

    two things here, have you checked to see if the location to store the pics if it is placed to the intenal memory and the memory is full

    also pls try to take a pic with another SD card may be that this card is either corrupted or damaged
    0helpful
    2answers

    Canon A520 powershot camera - the display panel is dark

    Use a memory card and memory card reader. If the images come out black you have a bad CCD in your camera.
    0helpful
    1answer

    Does not take picture 2

    using paint shop pro to browse memory stick via a generic card reader as always do when suddenly card no longer recognised and no drive is visible any longer. Upon putting card back into my DSCP73 I get the dreaded C1301 error and as your drive no longer visible even with win explorer no chance of a format.

    I restarted the PC and plugged back in the card reader to find that both of my cheap card readers can now see the drive but cant access the data.
    However this now allows right mouse click - scandisk with "fix file system errors". The drive was half full of totaly fragmented data which I could then defrag and finally delete. Upon placing card back into camera, fault has gone and everything is fine.
    0helpful
    1answer

    Camera and Computer suddenly don't work together.

    Try using a memory card reader (buy online or one might be built in pc/laptop) and take card out of camera and place in card reader
    0helpful
    1answer

    Camera/computer say memory card "needs to be formatted".....

    i would save your pictures on to a disc, then re-format the card.
    9helpful
    1answer

    CF Card Error

    Well there is a known problem witht eh CF memory design, i hope this is not your problem but it may be. Take your camera into a well lit area or get a small flash light. Open the memory door and peek down inside the camera and look at the pins inside the camera. Are they all uniform? does any look bent or out of place? there should be 2 uniform rows no pins should be missing or out of place. If they are you have a connection problem. This is one of the issues with this memory format and its why they have changed the design to SD. This is common with people who remove the cards alot and use a reader over time the card and the slot becomes warn and its very easy to bend pins because the card isnt sliding in smooth. If this is your problem (a few bent pins) you may have to take it in for service or try and fix it yourself. Ive read about people using a mechanical pencil. Remove the lead and the pin slips right into the top and you can carefuly move it back. Hope this helps!
    Not finding what you are looking for?

    Open Questions:

    0answers

    Pentax IqZoom 700 film camera E9 error shutter failure Hi, I have a pentax iqzoom 700 that I'd like to repair myself but E9 appears on the lcd screen after inserting a new battery and powering on. Other posts mention this is a shutter failure. When turning on, the zoom lens extends and the outer shutter covering the outside of the lens opens. I've read tutorials that say you can sometimes fix a shutter error by causing a power outage during a shot and opening the battery door while taking a picture, but this isn't possible in my case because no shot is fired when the shutter is pressed, likely because the camera recognizes the shutter failure. I've also watched videos on how to repair leaf shutters and mechanical shutters, but the manual for this camera states the shutter is an AE between-the-lens shutter so I have no idea how to disassemble and fix this sort of thing. Looking thru the lens both thru the front of the camera and in the film compartment on the other side show a dark covering behind the lens even while the outer shutter is open covering the outer lens, which I'm assuming is the between-the-lens shutter. Ideally, I'd like to repair this myself, as there's nothing lost if I screw up and it's not worth it otherwise to take it for repair. I'm a complete novice with absolutely no prior knowledge of taking apart things, but I can follow directions so any suggestions or links to videos/tutorials would be very much appreciated Side note that I've searched the web extensively and have yet to find anything specific to repairing this camera model, and I'm not knowledgeable enough to adapt a tutorial for a different camera to this model Thanks in advance!

    See all Polaroid PhotoMax PDC 4350 Digital Camera Questions

    139 views

    Ask a Question

    Usually answered in minutes!

    Top Polaroid Cameras Experts

    Ekse

    Level 3 Expert

    13435 Answers

    Steven Wander
    Steven Wander

    Level 3 Expert

    597 Answers

    David Shaub

    Level 3 Expert

    2991 Answers

    Are you a Polaroid Camera Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...