After runing Windows recovery software to fix a (different)problem on my Windows Millenium Edition PC, I ran the "Fujifilm Software for FinePix" CD ROM to reinstal the FUJI software that enables pictures to be downloaded to the PC. However, when I now connect the camera to the PC the download programme does not start. I should mention that prior to reinstalling the Fuji software, I inadvertently connected the camera to the PC. As the camera user manual states that the camera should not be connected to the PC until software installation is complete, I suspect that this may be the cause of my troubles.
Sometimes writing it down helps ;] Uninstall, and reinstall with camera disconnected. Some devices need to be out when installing their software, some need to be plugged in, on some it doesn't matter. If you're still having problems check if the USB works with other devices, maybe you need to reintall the USB drivers, or maybe its just broken. Post back if stuck, we'll figure something out ;]
First of all, you should stop saving any new files to your Samsung ES70 (or SD card) or taking new pictures.
Then find some photo recovery software, which are able to recover deleted or formatted photos from cell phone, digital camera, memory card and SD card etc.
Here are the steps:
Step 1: Download and install the Digital Photo Recovery Software.
Step 2: Connect your Samsung ES70 (or SD card, memory card etc) to your PC or Mac.
Step 3: Scan the source drive where your lost pictures located.
Step 4: Recover the lost pictures and save them to another drive instead of the source drive.
Usually answered in minutes!