I have sound but no picture

https://www.youtube.com/watch?v=EanHoWLLpxU

hi make sure the lamp door is securely fitted has there is a safety switch, thanks

shaun

Good morning
Take the remote and find set up and picture. Try to adjust the brightness and see if you do not get rid of the green light.
all the best
kolbrun

If Try one or more of the following

Ready light does not turn on and the camera does not work.

• Turn on the camera (Turning on the camera).

• Install new batteries (Loading the battery) or charge rechargeable batteries.

• Turn camera off, then back on.

Ready light blinks green.

• Camera is operating normally.

Ready light blinks amber.

• Wait. Resume picture taking when the light stops blinking and turns green.

Ready light blinks red and camera turns off.

• Install new batteries (Loading the battery) or charge rechargeable batteries.

Ready light glows steady red.

• Transfer pictures to the computer (Transferring pictures with the USB cable), delete pictures from the camera (Deleting pictures/videos), switch image storage locations (), or insert a card with available memory (Using an optional SD/SDHC or MMC card).

• Wait. Resume picture taking when the light turns green.

• Change the image storage location to internal memory (), or use a different card.

Ready light is off or glows steady green.

• Camera is operating normally

http://www.sonya20tvclassaction.com/main/home.sfx MAKE SONY FIX IT

Red light indicates that the camera is out of charged., Try to charged your battery for 3-4 hrs if you encounter flashing red on a fully charged battery you need to call kodak 1 800 235 6325 ext 12

You can charged you camera using 5V AC Adaptor or a USB cable taht attached into the computer

If you still have red light , it means the temperature of the lamp is too much. Did you buy the original part number of the lamp.

The unit is shutting itself down because a problem was detected internally. When this happens, the standby light should blink a repeated pattern. Please count the number of blinks and post the number here. That will indicate the circuit in which the problem occurred.

Thanks,
Dan

Did you find the problem I have the same

my front panel sound is not working.......?
how i can do this.?