Problem with att cordless phone wont ring - AT&T Lands Phones

Call forwarding is NOT a function or feature of the VTech 6041
cordless phones.

It is offered by some telephone service providers, but their
procedures are proprietary and specific to that individual
telephone (service) company -- if they offer it at all.

Good luck!

If the problem is with an AT&T cellphone you will need to call them or go log in online to change that feature, however if it is with a Uniden Cordless Phone (the product this question is linked to) the directions below found in their manual should help:

Uniden Cordless Phone
From the base
1) Press [clock/menu] three times. The base displays the current number of rings (2, 4, 6, or TS for toll saver) and announces the setting.
2) Press [>>/select] or [<</select] until the desired ring time appears.
3) Press [set]. A confirmation tone sounds, and the answering machine announces the new ring time.

From the handset
1) Press the MENU soft key. Select the ANSW. SETUP menu, and then the RING TIME submenu.
2) Move the cursor to select a Ring Time (2 TIMES, 4 TIMES, 6 TIMES or TOLL SAVER).
3) Press the OK soft key. You will hear a confirmation tone.

Hope this is of help

The best thing to do is to call them back and have them send someone over. sounds like it was not setup the right way. They should have made sure eveything works before they left.

All avalible manuls for ATT phones can be found here: http://telephones.att.com/att/index.cfm/product-support/manuals/#5000 I do not see that model it may not be available any longer.

Unplug your Phone and plug in a regular un-powered phone. If it rings your cordless base station is bad and you will need a new one if it does not ring then there is a problem on your phone line and you need to contact your phone company. Note, the phone company will charge you for repairs inside your house.

Press the MENU button repeatedly until "Change number of rings" is announced. Press the CHANGE button until the number of rings you want is announced. Press the MENU button to save the setting and go to the next feature or press the PLAY/STOP button to save the setting and exit programming. The PLAY/STOP button is the round button in the lower right of the base unit with the REPEAT/SLOW and SKIP/FAST buttons surrounding it. Here is a link to download the manual.

http://att.vtp-media.com/ecp/documents/product_Product/713/UserManual/2188/e5630_manual_bkm.pdf

please download your manual here in the list: http://telephones.att.com/telephones_ui/support/dsp_manuals_list.cfm

the router and cordless phone might be working in the same 2.4ghz frequency, try to keep the phone as far from the router as possible. and change the w/l channel in phone or the router so as to reduce the interference.

buy a new phone

Press PROGRAM
Press *
Press #
Enter 2 digits (11 through 22)
Press INTERCOM

This should work.