Heating & Cooling Logo

Related Topics:

Posted on Sep 04, 2011
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a Fujiaire split unit( wall type). The problem i have now is when i run the unit, it show a thick icing on the discharge side till to the indoor unit and also the air coming out from the unot os not cool. Can you please tell me what should i do or what it cause this problem please.

1 Answer

Horace Gardner

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

  • Expert 125 Answers
  • Posted on Sep 04, 2011
Horace Gardner
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Joined: Aug 31, 2011
Answers
125
Questions
1
Helped
40829
Points
259

System has lost some of the refrigerant charge. This means the system has a refrigerant leak.
Have a reputable heating and air contraxctor find and repair the leak, recharge the system and it should run perfectly.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How we repair LG ac showing C1

try switch the unit off till ice melts and try running the unit again after. if the ice is till coming back check the filters are clean and outside coil clean. sounds like a restriction in piping,possibly a blockage.
c1 err caused by the indoor pipe sensor being out of spec, possibly due to the ice buildup.
0helpful
1answer

Why is suction and discharge lines of Goodman WMC24-1A split ac system freezing up.?

Low on freon, dirty evap, dirty filter or maybe restricted at the metering device
0helpful
1answer
5helpful
3answers
1helpful
1answer

What could be causing one of the wall mount units to ice up on a 3 port mini split hp?

Icing is caused by one of two things.
1. The air coming in is too much and has a lot of water vapor in it.
2. The evaporator is too cold. This could be because of a low refrigerant charge
0helpful
1answer

Water from the ice maker overflowing into the ice container. Water also running down the inside of the freezer onto the bottom forming a thick block of ice. It melts,and flows to the floor.

Sounds like the water valve For the ice maker fill is leaking. these are solenoid type usually found at the back bottom outside of unit. turn water to this valve off at connection in wall . You can have that valve replaced
0helpful
1answer

Split unit aicon fujiaire appear e3 message

I have a Fujiaire split unit(wall type). I have this problem quite frequently, an error code E04 display, Try to look at the operating manual, it does not specify the problem, I check the compressor motor winding, the amount of F22 charge and clean the outdoor and indoor unit. Wonder why put an Error code when there is nothing on the troubleshooting list. But whenever the authorize repair man come for servicing, he could not tell me. Does anyone has a solution?????
6helpful
2answers

LG Ductless Mini Split System LAN125hv: Heat pump doesn't run.

First check your circuit breaker or fuse that supplies power to the outside unit. It's probably separate from the inside unit. Then try to turn unit on. If the fan and compressor just make a humming sound then turn it off and check the capacitor if you have a multimeter. You can also look at it and see if the top looks expanded. That's a good sign its bad, but not all bad one's look expanded. Tomorrow I will have access to an LG service manual and can let you know what the code means. Sorry I can't get it sooner. Let me know what you find.
1helpful
1answer

Split HVAC does not achieve requested temperature

If is heating on outside temp must bee max 5 degree
Celsius.If leak inside unit then check drain hose.

1helpful
1answer

Whirlpool side by side Refrigerator not cooling, two -- where -18 temp used to be.

the fact the bowl was filled with water and that you said the inside of the freezer was coated with ice, indicates a failure of the defrost system.
now the ice has gone, reset the temps and wait to see what happens
Not finding what you are looking for?

828 views

Ask a Question

Usually answered in minutes!

Top Fujitsu Heating & Cooling Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66831 Answers

Are you a Fujitsu Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...