Question about LG WD-1280FHD Front Load Washer

1 Answer

Loud noise when on spin cycle

I have an LG intello washer D model number WM-1285FHD and when it spins there is a very loud wurring noise. It doesn't matter what spin speed I use the same noise is made. I have been advised that as it is a direct drive motor that the bearings may either be dry or have failed. On further inspection the engineer then said that he wasn't sure and will have to do further investigations. As the product is relatively new do you have any information relating to this issue. Regards Mrs Lazzari

Posted by Iris Lazzari on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 277 Answers

Hi the engineer probeply rejected agitator dogs problem sounds like he is right for the diagnosis on the bearings although it is very wired forthis problem on a new machine its probeply a defect bearing http://www.applianceaid.com/direct.html#agitating http://www.repairclinic.com/0047_11.asp good luck

Posted on Apr 30, 2006

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Makes noise in spin cycle and now it started smoking. Tub seems to spin more easy but i don't hear anything like a bearing.

LG WM2688H Front Load Washer Smoking power ... - Fixya

www.fixya.com > ... > LG > WM > LG WM2688H Front Load Washer
LG WM2688H Front Load Washer, smoking power related issues. ... is it worth trying to fix drum loud and rattles when on spin cycle, then smoke started pouring out of ...hi working till smoke came out the back and now no power - Unplug it. ... washer makenoise doing spin cycle smell smoke make the power cord warm to ...

LG 4280FR4048L Bearing - AppliancePartsPros.com

www.appliancepartspros.com > ... > Washer > Kenmore Washer Parts

Rating: 5 - ‎189 reviews - ‎$32.19
Burnt rubber smell at end of cycle from 11 yr old lg wm2277hw front load washer i hand spun inner drum it was ... Appliance: LG Washer WM2277HW ... Our LG "Tromm"washer (a.k.a. "Trommy Baby") started making a horrible ... The bearings were worn and made very loud noise in the spin cycle John A. • Punta Gorda, FL.

LG WM2455HW washing machine problem - YouTube

? 10:29
https://www.youtube.com/watch?v=__abhTwmi1I
Sep 15, 2010 - Uploaded by djmcarter
I also have an LG refrigerator, which makes a loud sound (it's the.... I am watching your video while mopping up water underneath the exact same machine right now. ... How to Fix an LG Front load washer machine that wont spin - Duration: 5:32. ...
0helpful
1answer

I have a top load fridgidaire washer model fwsc445rfs0. During the wash cycle it makes a high pitched scraping noise.... Struggles also while it winds down before rinse. Bearing maybe?

How To Fix A Washing Machine Making Noise During The ...

removeandreplace.com/.../washing-machine-making-noise-during-the-sp...
Jul 27, 2015 - Agitator directional cogs aka "agitator dogs" (top load washers) ... If you hear a rubbing sound or the drum spins uneven, then the ... A washer making a loud noise during spin cycle can also be caused ... The clutch in a washing machine connects the inner wash tub to the ..... May 8, 2015; High Water Bill?

Dishwasher Making Loud Grinding Noise During Wash Cycle

removeandreplace.com/.../dishwasher-making-loud-grinding-noise-durin...
Apr 11, 2014 - Dishwasher Making Loud Grinding Noise During Wash Cycle ... GE, Whirlpool, Frigidaire, KitchenAid, Maytag, Kenmore, and LG) this is a .... Our Amana dishwasher is making a loud, high-pitched squealing noise throughout the wash ....Out Of A Washing Machine - Top Load & Front Load September 30, ...

All comments on Loud dishwasher Frigidaire Gallery mode ...

https://www.youtube.com/all_comments?v=v-arYb20kOk


0helpful
1answer

TROMM WM2277HW Front loader washer has an increasing louder spin cycle.

LOUD NOISES IN MACHINE;
LOT OF THINGS TO CHECK, THE BELT LOOSE OR WORN, THE CLUTCH, THE TRANNY, THE BEARINGS BOTH TUB SEAL AND BEARING, THE REAR DRUM BEARING,
THE DRIVE PULLEY- If the washer is making a loud noise the drive pulley might be worn out, cracked, loose or bent. Remove the drive pulley and inspect it carefully. If it is damaged or defective replace it.
THE TRANSMISSION, THE MOTOR COUPLER, THE MOTOR DRIVE BEARINGS,
THE DRIVE MOTOR- If the washer is making a loud noise the drive motor bearings may have worn out. Washer motors are normally almost silent when they run. If the motor is run without a belt hooked up to it and it's loud it will have to be replaced.

0helpful
1answer

Washer making whining noise wash cycle

see this steps and fix it. God bless you

Tub Bearing

If the washer is making a loud noise the tub bearing might be worn out, this is a common problem. The bearing can be replaced. On some models the bearing is part of the outer tub and the outer tub will need to be replaced.


Enter your model number to see parts for your washing machine.
Help me find my model number


Tub Seal and Bearing Kit

If the washer is making a loud noise the tub seal and bearing kit may need to be replaced. This is a common problem. sometimes the tub seal and bearing are part of the outer tub and the outer tub would then need to be replaced.


Enter your model number to see parts for your washing machine.
Help me find my model number


Rear Drum with Bearing

If the washer is making a loud noise the rear drum with bearing might need to be replace. On this washer the bearing is not sold separately, the entire rear drum will have to be replaced. This is a very involved repair and will require disassembling most of the washer. However, the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.


Enter your model number to see parts for your washing machine.
Help me find my model number


Bearing

If the washer is making a loud noise the bearing might be worn out. As bearings wear out from friction they gradually get worse and worse until they fail. In the meantime they get louder. If the noise primarily happens during the spin cycle the bearing is likely the problem.


Enter your model number to see parts for your washing machine.
Help me find my model number


Drive Pulley

If the washer is making a loud noise the drive pulley might be worn out, cracked, loose or bent. Remove the drive pulley and inspect it carefully. If it is damaged or defective replace it.


Enter your model number to see parts for your washing machine.
Help me find my model number


Pulley

If the washer is making a loud noise the drive pulley may be worn out. If the drive pulley is loose or wobbling it will need to be replaced


Enter your model number to see parts for your washing machine.
Help me find my model number


U-Joint Kit

If the washer is making a loud noise the U-Joint may have failed. This is the primary drive mechanism for the agitation motion in this washer. Although this is not a very difficult repair for a DIY'er with some experience, the part is expensive and so it may be worth considering a new washer.


Enter your model number to see parts for your washing machine.
Help me find my model number


Motor Coupling

If the washer is making a loud noise the motor coupling might have failed. The motor coupling connects the motor to the washer transmission. It is designed to fail if the washer is overloaded in order to protect both the motor and transmission.


Enter your model number to see parts for your washing machine.
Help me find my model number


Clutch

If the washer is making a loud noise in the spin cycle, the clutch assembly might be worn out. The clutch assembly makes the connection between the transmission and the inner tub. It is designed to allow the tub to get up to the proper spin speed gradually. As the clutch wears out it may become loud during spin or just after the spin cycle finishes. The clutch is not repairable, if it is loud or not working properly it will need to be replaced.


Enter your model number to see parts for your washing machine.
Help me find my model number


Drive Belt

If the washer is making a loud noise the drive belt might be defective. Over time the drive belt will dry out and start cracking, eventually a piece of the belt can break off resulting in a loud noise whenever the motor is running.


Enter your model number to see parts for your washing machine.
Help me find my model number


Transmission

If the washer is making a loud noise the transmission might be worn out or defective. There are many other more likely causes for noise from a washer. If the noise turns out to be caused by the transmission it may have to be replaced.


Enter your model number to see parts for your washing machine.
Help me find my model number


Drain Pump

If the washer is making a loud noise the drain pump might be going bad or might have something caught in it. Remove the drain pump from the washer and inspect it carefully. Look for anything that might be caught in it, a piece of wire, plastic, etc. If nothing is wrong with the pump, but it's still noisy it will have to be replaced.


Enter your model number to see parts for your washing machine.
Help me find my model number


Drive Motor

If the washer is making a loud noise the drive motor bearings may have worn out. Washer motors are normally almost silent when they run. If the motor is run without a belt hooked up to it and it's loud it will have to be replaced.


Enter your model number to see parts for your washing machine.
Help me find my model number


Water Inlet Valve

If the washer is noisy or loud, particularly when the washer is filling, the water inlet valve is at fault and will need to be replaced.
0helpful
1answer

There is a very loud noise that occurs once the spin cycle comes on. sounds as if there are rocks being spun in the unit,. it happens on every setting except the 'hand wash' cycle. what can I do to check...


Hi,


When my washer did that, I found that the shocks that hold the tub were bad...

Check out this tip I wrote about the noise and vibration that front load washers can make..

Washer Problems
Washer noise when spinning


heatman101

0helpful
1answer

Loud noise when washing machine is spinning

The loud noise could be caused by something stuck in the washer. Check the washer for signs of loose objects. It can also be caused by a worn-out belt.
0helpful
1answer

When spinning making a loud noise

you can check the damage on axis bearing Bosch, exactly is behind close to the fan belt pulley. You have to replace it. 
0helpful
1answer

Everything works great -until the spin cycle - loud noise

Have you checked to make sure all three shocks under the tub are ok?
2helpful
1answer

Lg wm1832cw front load washer

One of 2 things may be causing the loud noise.  Either the rear bearing on the drum has failed and will need to be replaced (very expensive) or the drain pump has a bearing problem and is making a very loud noise when it is draining (not too expensive).  Either way, you will need a qualified LG technician to diagnose and repair the problem.
Not finding what you are looking for?
LG WD-1280FHD Front Load Washer Logo

502 views

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...