Canon i350 InkJet Printer Logo

Question about Canon i350 InkJet Printer

2 Answers

Canon i350 printer waste ink tray full.

There is a green and an orange light flashing alternately on the printer. according to the users guide this indicates that the waste ink container if full, but does not say how to empty it. can you help.

Posted by george keene on

Add Your Answer
  • Anonymous Mar 27, 2014

    canon s750 printer

×

Ad

2 Answers

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points
    All-Star:

    An expert that got 10 achievements.
    MVP:

    An expert that got 5 achievements.
    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

According to cannon the Waste ink ABORBER not tank is getting full. To clear this error press resume and print button. But this will only fix your problem if at all for a short time as this is not considered user replaceable part. You can contact canon on line at http://consumer.usa.canon.com Good luck

consumer.usa.canon.com

Canon Inc

consumer.usa.canon.com

Posted on Apr 23, 2006

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Http://startcopy.ru/codes/canon_ip.htm
Good luck!!!

Posted on Dec 13, 2007

Ad

1 Related Answer

pineworks

Clive

  • 4345 Answers

SOURCE: canon i350 printer waste ink tray full.

Hi there
Ok take care how you do this.
There no easy way the printers are been made this way so you take them to the shop, but if you are handy with your hands and know what you are doing then you will need to take all apart and take out the ink pads inside the printer and clean them up make sure they nice dry when put back in, then you are going to need a program that you can find on the internet it will be called waste reset tools, or your printer will not work even after you done the clean out.

I am not sure what canon you have so I cant tell you the tools you need for yours, i have got canon MP-Tools on my website if this is the one you need.
with this you can reset the waste ink tank before you do the clean out but remember in time you will need to clean out or it going to be a big mess of ink coming out your printer.

Click Link = http://www.4all2sell.com/reset-tools/MPTool.exe

All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

All files on my website are only there for a limited time

Posted on Apr 25, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

When i try to print i get a message "used ink tank is full" canon i350
This applies to Canon printers but since you did not specify the printer name and model here is the information I have courtesy of Canon's Support Website.

Don

Issue: Alarm / Power light flashes orange 8 times consecutively (Waste Ink Nearly Full Error)
Solution: Press the <RESUME/CANCEL> button to clear the error (1700)

Waste ink absorber error 1700 The printer has a built-in waste ink absorber to hold the ink used during print head cleaning. Eight flashes indicates that this absorber is nearly full.

Press the <RESUME/CANCEL> button on the printer to clear the error, so you can continue the print job. The printer will need to be serviced as soon as possible.
Read full answer
Dec 01, 2009 • Canon Office Equipment & Supplies
1helpful
1answer

Tank absorber full and lights blinking
The POWER Lamp Flashes Orange Eight flashes: Waste ink tank almost full
The printer has a built-in waste ink tank for the ink used during print head cleaning. Eight flashes indicates that the waste ink tank is nearly full. Press the RESUME/CANCEL button to cancel the error so you can continue printing. Before the waste ink tank becomes completely full, contact a Canon service representative.

Note
Canon recommends that you call for service as soon as this error occurs. Once the waste ink tank becomes completely full, printing will no longer be possible.
Read full answer
Sep 14, 2009 • Canon i350 InkJet Printer
0helpful
1answer

After the power went off my printer doesn't print and is in a cycle of green and orange light. What can I do?
my printer says the waste ink tank is full, and the power lamp flashes alternately green and orange
Read full answer
Jun 30, 2009 • Canon i350 InkJet Printer
0helpful
2answers

E3 flashes when turned on
hi,
CANON PIXMA MP160 All-In-One InkJet Printer has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....
75aba9d.jpg3f22050.jpg

http://www.canon.com/printer/prob676ijt65/solution

prito-i-1
Read full answer
Feb 22, 2009 • Canon PIXMA MP160 All-In-One InkJet...
0helpful
1answer

How to change the ink for canon i350
Try This:

Here's the owners manual

http://safemanuals.com/user-guide-instructions-owner-manual/CANON/I350-_E

Hope this helps

Dr. Geek MD
Read full answer
Feb 12, 2009 • Canon PIXMA MP160 All-In-One InkJet...
4helpful
1answer

Canon pixma mp160 flashing E2
Found this on our site:
How to clear Error Code Canon printers MP150 MP160
CANNON Printers MP150/MP160 ERROR CODE

E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber full

E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error




try this method:

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks

0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Read full answer
Nov 23, 2008 • Canon PIXMA MP160 All-In-One InkJet...
3helpful
2answers

Canon MP 160 flashing 2E
Found this on our site:
How to clear Error Code Canon printers MP150 MP160
CANNON Printers MP150/MP160 ERROR CODE

E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber full

E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error




try this method

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting formenu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks

0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Read full answer
Nov 22, 2008 • Canon PIXMA MP160 All-In-One InkJet...
0helpful
1answer

Canon i350 printer waste ink tray full.
Hi there
Ok take care how you do this.
There no easy way the printers are been made this way so you take them to the shop, but if you are handy with your hands and know what you are doing then you will need to take all apart and take out the ink pads inside the printer and clean them up make sure they nice dry when put back in, then you are going to need a program that you can find on the internet it will be called waste reset tools, or your printer will not work even after you done the clean out.

I am not sure what canon you have so I cant tell you the tools you need for yours, i have got canon MP-Tools on my website if this is the one you need.
with this you can reset the waste ink tank before you do the clean out but remember in time you will need to clean out or it going to be a big mess of ink coming out your printer.

Click Link = http://www.4all2sell.com/reset-tools/MPTool.exe

All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

All files on my website are only there for a limited time

Read full answer
Jul 07, 2008 • Canon PIXMA MP780 All-In-One InkJet...
0helpful
2answers

Canon ip2000, light flashes orange
check the scart is in properly ****.
Read full answer
Jun 25, 2008 • Canon PIXMA iP2000 InkJet Printer
0helpful
1answer

Canon i350
http://startcopy.ru/repair/can_s_ip.htm
Read full answer
Nov 08, 2007 • Canon i350 InkJet Printer
Not finding what you are looking for?

View Most Popular

i350 InkJet Printer

  • Office Equipment & Supplies

Related Question

When i try to print i get a message "used ink tank is full" canon i350

  • Canon Office Equipment & Supplies

Open Questions:

0answers

RESUME/CANCEL button on i 455
Read full answer
Be the first to answer May 09, 2014 • Canon i350 InkJet Printer
0answers

gmailhow do I gey to gmail. I have this windows 8.1. had a local tech clean it up AND NOW I CANNOT GET MY EMAIL FROM GOOGLE. CAN YOU TEL ME HOW?
Read full answer
Be the first to answer May 09, 2014 • Canon i350 InkJet Printer
0answers

waste tank full how to reset
Read full answer
Be the first to answer Apr 01, 2014 • Canon i350 InkJet Printer
0answers

download standby in ir 2016 download standby error
Read full answer
Be the first to answer Mar 28, 2014 • Canon i350 InkJet Printer

See all Canon i350 InkJet Printer Questions

Related Topics

986 views

Ask a Question

Usually answered in minutes!

Popular Questions

Canon pixima mp140 error code E4

Canon MP140 PHOTO AIO All-In-One...

Canon IR C3100n copier "NG 853" error

Canon imageRunner C3100 Copier

Error code E31 scanning with Canon MP495

Canon PIXMA MP495 InkJet Printer

Aborber full error message

Canon PIXMA iP4600 Color InkJet...

Reset ink level on CANON MP 140 PIXMA PRINTER

Canon PIXMA Office Equipment &...

Check Out the Latest Printers Report
Check Out the Latest Printers Report

View all Fixya Reports

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2406 Answers

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6450 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...