Ovens Logo

Related Topics:

Question about Ovens

2 Answers

My rational selfcooking center says service34-2- no function please help

Posted by simonnurse_s on

Add Your Answer
  • Yves Parent
    Yves Parent Nov 27, 2014

    Service 34 - 2 points to the bottom motor. You have a 201 or 202, right? However it may just be the cable that got disconnected. You can check that easily.

×

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    New Friend:

    An expert that has 1 follower.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

You really need a specialist repairer to resolve this but this generally relates to a main fan motor defect or a failure elsewhere in the bus circuit.

Posted on Apr 17, 2012

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

RATIONAL Service - always there for you A comprehensive service network of skilled RATIONAL SERVICE PARTNERS guarantees you rapid assistance if problems arise. RATIONAL also provides a technical hotline for its customers plus a guaranteed supply of spare parts as well as a country-wide weekend emergency service.

To contact Service by telephone, ring: Toll Free (866) 891-3528

Posted on Sep 05, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Error 19 on rational oven selfcook
Hi,

this error relates "not in use" and occurs when a necessary activation hasn't occurred. Please call Rational to move forward: 866-891-3528 . Thank you.
Read full answer
Sep 29, 2022 • Ovens
0helpful
1answer

I have a Rational SCC 101LP oven and when the power goes down and gets restored the error code ESTB appears and will not allow the oven to operate. How do I clear this once and get back to cooking?
you have a code that is not documented, phone their service department. It is probably just advising there has been a power outage.

https://www.techtownforum.com/2020/02/20/rational-scc-service-codes/

From Rational

Training manual Trouble Shooting

 https://portal.rational-online.com > englisch_1 > T...
PDF
CM shows error code E12; cabinet temp. display shows 1 CO: Bus problem bottom motor. 2 ST and 2 CO refer to the upper motor. SCC shows Service 34.2.
Read full answer
Aug 09, 2022 • Ovens
0helpful
1answer

Rational SCC 102. What causes error code 20 to keep on popping up?
Looks like a defective thermocouple. The fix is to replace the thermocouple.

https://www.techtownforum.com/2020/02/20/rational-scc-service-codes/

https://www.thehanadvisor.com/2020/06/rational-combi-oven-error-codes.html

https://www.partstown.com/rational/thermocouples-thermopiles/parts

https://portal.rational-online.com/fs4p/media/service/4_training_1/2_trainingshandbcher/englisch_1/Trouble_Shooting_SCC_Line_EN.pdf

https://www.rational-online.com/en_us/customercare/contact-us/
Read full answer
Mar 09, 2022 • Ovens
0helpful
1answer

My Rational oven model number CMP 202 says E34 please help?
check link below
https://www.google.com/search?q=Rational+oven+model+number+CMP+202+says+E34+please+help%3F&oq=Rational+oven+model+number+CMP+202+says+E34+please+help%3F&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8
Read full answer
Jan 20, 2021 • Ovens
0helpful
1answer

Rational Combimaster Plus. Why is it indicating E 34?
So I found the service manual for this model.

https://www.rational-online.com/media/downloads/en-gb/manuals/rational-original-operation-manual-cmp-en-gb.pdf

The list of codes is on page 105. Code E34 is simply listed as contact customer service. Which is not really all that helpful in diagnosing the problem. Have you tried to reset the oven? Disconnect the power cord for 2-3 minutes and trying again? If this doesn't work, given the general code, you should call the customer service number in the manual.
Hope this helps.
Read full answer
Sep 22, 2020 • Ovens
0helpful
1answer

Started clean cycle on rational oven and ran for a bit and clean cycle aborted. and would clear on the screen. How do we reset rational
Use something similar size to the rational pills, place it where you would normally put the pills for cleaning, go to start the cycle, then pop the door before you press start, should trick the rational into unlocking,
Read full answer
Nov 14, 2018 • Ovens
0helpful
1answer

Hi, I have a rational SCC61 6 grid combi and recently it takes 5 or 6 attempts to switch it on, I get the 5 senses logo and then nothing happens, it's now hardly responding at all. Any ideas??
Rational SCC61E 6 Grid 1/1GN Electric Self Cooking Center / Combination Oven, call for service yet?

Read full answer
Jul 04, 2017 • Ovens
0helpful
1answer

RATIONAL CPC GAS
Hi, does the oven work okay on hot air? Steam function uses the steam burner and hot air burner so there is alot of possible causes.
Read full answer
Mar 21, 2014 • Combi Ovens
0helpful
2answers

Scc-101 rational fault codes
Rational SCC error code service 100
Read full answer
Aug 27, 2012 • Ovens
13helpful
4answers

Rational combi oven service manual
Alarm beeping control board not working
Read full answer
Apr 28, 2010 • Ovens
Not finding what you are looking for?

View Most Popular

Ovens

Related Question

Error 19 on rational oven selfcook

  • Ovens

Open Questions:

0answers

Where to find Manual for Kenmore range oven c970-652231? Although I've ended up with 2 of these ovens one in home, other in rental property, I can't find anything online about how to clean the numerous glass doors... looking for the manual if anyone can point me to where it can be found, it'd be greatly appreciated. Many thanks!
Read full answer
Be the first to answer Feb 03, 2023 • Kenmore Ovens
0answers

Roper oven model FEP310GW0. Oven will not heat The oven on my Roper model FEP310GW0 will not heat. I replaced the safety thermostat but that didn't fix it. I checked the bake element and it has continuity. The broil does not. Neither element heats at all. When the control knob is turned the indicator light does not come on. The surface heats just fine. I'm at a loss as to what's wrong.
Read full answer
Be the first to answer Jan 31, 2023 • Ovens
0answers

Wiring diagram for a pro chef convection oven It's model AH-798HL
Read full answer
Be the first to answer Jan 26, 2023 • Magic Chef 9122 Gas Single Oven
0answers

GE TRIVECTION JT930S OVEN WONT COME Othe thermal fuse N Power to the oven, where is
Read full answer
Be the first to answer Jan 12, 2023 • GE Ovens

2,397 views

Ask a Question

Usually answered in minutes!

Popular Questions

Melted Tin Foil in bottom of oven

Kenmore 33169 Gas Single Oven

Self cleaning oven directions

Kenmore 40494 / 40495 / 40499...

We got the F97 error code on our GE double ovens. We bought a new cooling fan and replaced it last night. It didn't work

GE Ovens

F6E0

KitchenAid Architect Series...

Our GE Profile JTP18 keeps flashing "door lock" since we ran a self clean

GE Profile JTP18 Electric Single...

Top Ovens Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

Cindy Wells

Level 3 Expert

6589 Answers

john h

Level 3 Expert

28541 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Oven-Instructions-New-World.pdf....

New World G70m Gas...

PDF Manual
Ovenmanual_jkp27woa2ww_003675050.PDF....

GE Profile JTP18...

PDF Manual
Ovenmanual_jkp27woa2ww_003675050.PDF....

GE Profile JTP18...

Loading...