I cannot remove the light bulb from my Baby Lock Evolve. How do I get to it?

Which stitch are you going to use? This site, http://www.manualsdir.com/manuals/755903/baby-lock-evolve-previous-model-ble8w-quick-reference-threading-guide.html , has several of the guides for threading the Baby Lock Evolve BLE8W. Another site with the threading diagrams is https://www.manualslib.com/manual/453731/Baby-Lock-Evolve.html . Manuals Lib also has the manual for the Baby Lock Evolve here: https://www.manualslib.com/manual/453728/Baby-Lock-Evolve-Ble8w.html . The threading information starts on page 19.

I hope this helps.

Cindy Wells

Is it model Evolve, or Evolution?

..

Gathering on Serger

Baby Lock Ruffling Foot

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0ahUKEwiG9L3_mNfSAhUmrVQKHej2D_AQFggcMAA&url=http%3A%2F%2Fbabylock.com%2Fftp%2Fwhitepapers%2FEvolve_BLE8W_InstructionRef.pdf&usg=AFQjCNG5N-rR0p7Yt9kKcq3BMQ6v1bBVsA&cad=rja

Bulbs can be found online. In the link below locate PDF page 87 for how to replace the bulb. Be patient, it takes a while to load.

http://www.babylock.com/ftp/whitepapers/Evolve_BLE8W_InstructionRef.pdf

contact babylock & ask them

This is all I found - http://www.sewingmachinesales.com.au/index.php?act=viewCat&catId=12

As wide as you want, but anything over a few inches is going to be difficult to guide.

You will get a more even cut if you trim away most of the excess down to a few inches, like with a rotary cutter and mat.

Use this BabyLock Dealer Finder LINK, If none local, ask head office for advice and availability.

You have to get the replacement wires from a Babylock dealer, I did too then after sticker shock at the price of that wire I learned to make a thread cradle and use that to thread difficult threads no. Take about 24 inches of regular sewing thread and fold it in half, put the open ends (together, same legnth) into the jet air port and hold onto the loop end, press the jet air threader and it will thread the machine, insert the thread you want to use into the loop you have in your hand and pull it thru the machine using the ends of the thread you put thru the machine, sounds harder than it is and works all the time. No more spending $8 on replacement wires. You can use this method for all the jet air sergers.

Baby Lock offers free downloadable instruction manuals for their products. Go to http://www.babylock.com. Find your model's product page; for example, mine was the Baby Lock Evolve Model BLE8W. Once on the product page for your particular model, you will find a link towards the bottom that says "Manuals & Guides." Click on this link and there will be links to download the manual and anything else, like a Quick Reference guide.