My mp3 player isnt working

plug it into the usb

Its very easy...here is a link to a user manual.

It isnt the exact brand but all mp3 players are the same basic instructions:

http://mp3support.sandisk.com/downloads/um/c200v2-um-eng.pdf

Its very easy...here is a link to a user manual.
It isnt the exact brand but all mp3 players are the same basic instructions:
http://mp3support.sandisk.com/downloads/um/c200v2-um-eng.pdf

Its very easy...here is a link to a user manual.

It isnt the exact brand but all mp3 players are the same basic instructions:

http://mp3support.sandisk.com/downloads/um/c200v2-um-eng.pdf

Memorex=3M. Like the video tapes, it's guaranteed for life. There's probably nothing you can do yourself if it uses MTP as opposed to UMS, otherwise you could just format it on your PC and start over.

what kind of player do you have?

Reformat the player - the instructions are in your user's manual, which can also be obtained off the internet at: http://www.memorexelectronics.com/html/product_detail.php?PID=650#

If that fails, get the firmware upgrade from the above-mentioned website

There are two ways to format an Mp3 player - one on the computer itself, and one in Windows Media Player. Both methods will end up erasing all the songs on the player, but the player will be "good as new" after that. Sometimes reformatting in this manner will override the player's native formatting and cause problems - this can be reversed in most cases by updating the player's firmware. Firmware upgrades are available from most manufacturers' websites.

WARNING: The following procedures will erase all songs on the player.

Check if the file system is NTFS. If yes, format it to FAT or FAT32. - Connect player to computer, double-click my computer, right click on icon of mp3 player and select format. This only applies to Windows-based computers.
You can also format the player in Windows Media Player itself:
Connect your Mp3 player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "name of Mp3 player here 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
-Tha Mp3 Doctor

reinstall the firmware, following the next steps:

Download the firmware from Memorex site (www.memorex.com) but use the firmware for MMP8620 NOT the one for MMP8640, otherwise you will finish with your player starting with a blank screen.

FIRMWARE UPDATE INSTRUCTIONS FOR MMP8640.
1. Make sure the unit is powered off.
2. Plug one end of the USB cable into the USB port on your PC.
3. Click on the start button on the lower left hand corner on you PC.
4. Highlight Programs, on the drop down page highlight Memorex Aptitude Digital Audio Player.
5. On the drop down window click on “Memorex Aptitude Firmware Download”.
6. Memorex Aptitude Firmware Download Window will open with a notice “PLEASE CONNECT
DEVICE”.
7. Press and hold down the MENU button on the MP3 player at the same time connect the other end of the
USB cable to the USB port on the player.
8. Firmware Download Window will begin initializing.
9. Keep holding down the MENU button on the player until the Firmware Download Window displays
“READY”.
10. Release your finger from the MENU button.
11. In the Firmware Download Window, put a check mark beside Format Data Area.
12. Click on the START button in the Memorex Aptitude Download window.
13. Wait until the screen says “firmware download complete”.
14. Click on the CLOSE button.
15. Disconnect the USB cable from the player. The player will turn on by itself. If the player doesn’t turn
on automatically, press the power button.
Please note if an ERROR message appears on the display of the player when the player powers on, you
need to repeat steps 1 - 15.
WARNING: DO NOT INTERUPT FIRMWARE DOWNLOAD PROCEDURE


Hope it helps, I solve the problem just like this.

i formatted my rca h116a 6gb on a vista and i got the "fat error! plz connects ums device format hdd" then i used it on xp and formatted it then it reset then worked properly try xp not vista

sounds like your battery has gone kaput. You'll need another one from Memorex, and they're not cheap.