I'm assuming you are trying to use an SD card in your camera and not the internal memory. I suggest you format the memory card if you are sure there is nothing on the card. Formatting the memory card deletes everything on the card and sets it up with a file system that your camera recognizes. Follow these steps to format your memory card using your camera.
1. Turn camera off
2. Insert memory card
3. Turn camera on
4. When the memory card is inserted in the camera,
the [Format card] option appears in the setup
menu
5. Choose Format to format the entire card. Don't choose Quick Format
6. Wait until your card is formatted
After formatting your memory card, try turning your camera off and on and you should now be able to take pictures to your memory card.
P.S. If you remove your memory card you can choose Format Memory from the setup menu to format the camera's built-in internal memory
Try formatting the card, instead of the "Delete All" option. Maybe there's some corrupt data on it and formatting will clear that. Other than that, does your memory card have a lock switch? Get it out of the camera and check. If it's there make sure it's in the upper position (meaning that the card is unlocked - writable).
SOURCE: When i turn on my camera, it won't read my
If the card was one that was previously used in another camera, you can't use it in this camera without formatting it. Move the pictures to a computer and format the card via the camera (remember that all data on the card will be erased). Before formatting the card however, make sure the battery has sufficient charge as this process can take some time. Also remember to never interrupt this process as it can damage the card. The format option can be found in the settings.
Note: pictures taken on one camera can't be viewed on another camera.
Testimonial: "thanks !!!!"
3,835 views
Usually answered in minutes!
×