Question about Motorola Mobility RAZR V3

Replacing the Motorola Razr outside case (shell)

Hi, I need detailed instructions on how to replace the outside hard case or shell on the Razr V3. I have all the parts and tools....I think :)))) I have found instructions on other Motorola models but not for the Razr. Please help. I don't want to mess it up without the instructions Thx Peter

2 Answers

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.
Master
3,130 Answers

Without a service manual this is a hard call but if your handy theres a few good tricks you can apply.. first look at the new case while its open and nothings inside. You see little bosses sticking up ?? this is where you will find tiny screws from the other unit holding down the curcuit boards!! No when separating you got two really big concerns.. First are any componets glued into place?? and are there any ribbon cables that are so fradgle that if you sneeze they will break?? ou basicly have to reverse engineer when taking something apart for the first time as its a very very challenging task.. GOOD LUCK tooYA!!!

Posted on Apr 16, 2006

Anonymous

Level 1:

An expert who has achieved level 1.
Contributor
1 Answer

Hi could you did the replacement yourself? I am doing the same , I have all the tools but I cant find any instructions.
my email is [email protected]
I saw your posts on other websites.
Let me know.

Thanks

Posted on Feb 12, 2008

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

2 Answers

Unlock t-moble motorola

Hi Karzan,

In that case you will need to contact your carrier. So they can help you with that.

Regards,

Maya
Motorola Support

Jun 22, 2016 | Motorola Mobility RAZR V3

1 Answer

Unlock code for motorola razr

Hi, you can get the accurate unlock code for a Motorola Razr V3 from www.wickedunlock.com/motorola-razr-v3/rs16wp9/ at low cost with easy step by step unlocking instructions. All the best mate.

Dec 03, 2012 | Motorola Mobility RAZR V3

2 Answers

How to enter subsidy password for motorola razor v3

You can get the Free subsidy code entering instructions or unlock code entering unlocking instructions from here
www.mobileunlockguide.com
and Unlock it step by step...

Motorola RAZR V3 Unlocking Instructions
Warning: Do not enter any wrong unlock unlock codes on your Motorola RAZR V3 mobile phones. If you enter over a certain amount of wrong unlock codes on your mobile phone, your phone may get hard locked and sometimes become unusable.

1 - Switch ON your Motorola RAZR V3 with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola RAZR V3 is locked to.

WARNING: If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

Sep 25, 2011 | Motorola Mobility RAZR V3

1 Answer

Help me unlock motorola razr v3

hi you can get the unlock codes from here
http://www.mobileunlocksolutions.com/motorola-razr-v3/rs1wp9/
and get the instruction about how to use the codes in your mobile from here
http://www.mobileunlockguide.com/motorola-razr-v3

May 26, 2011 | Health & Beauty

2 Answers

I have bought a mororla razr from america i cannot find where to put the sim card , i have looked under the battery compartment

Check the link below for info on how to remove/insert your SIM card:

http://www.somelifeblog.com/2007/03/motorola-razr-v3-how-to-remove-sim-card.html

Just in case you need instructions on how to remove the battery. Check the link below:

http://www.somelifeblog.com/2007/03/motorola-razr-v3-how-to-remove-battery.html

May 22, 2011 | Motorola Mobility RAZR V3

1 Answer

My motorola v3 displays asterisks when entering unlock code. How do I tell if I'm entering lower case alphabetic characters as required in cetre of code?

Get the unlock code and the unlocking instructions sent to you through email. Unlock Motorola RAZR V3

Apr 11, 2011 | Motorola Mobility RAZR V3

3 Answers

Unlock razr v3

Which Country Network Lock now?
You can get the Unlock code and Unlock Instructions at

http://www.theunlockspot.com/motorola-razr-v3/rs10wp9/
follow the Instructions and Unlock it step by step:
Motorola RAZR V3 Unlocking Instructions Warning : Do not enter any wrong unlock codes on your Motorola RAZR V3 mobile phones. If you enter over a certain amount of wrong unlock codes on your Motorola RAZR V3 mobile phone, your phone may get hard locked and sometimes become unusable.
1 - Switch ON your Motorola RAZR V3 with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola RAZR V3 is locked to.

WARNING: If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody already entered too many wrong codes, you just have to leave the Motorola RAZR V3 ON with the errors message and after 40 minutes to 2 hours the message "Enter Code Special" will appear again!

Mar 17, 2011 | Motorola Mobility RAZR V3

2 Answers

Instructions for replacing Motorola V3 mini USB charger port.

Hi,

Here is a guide that might assist you accomplish the task.

http://www.celtnet.org.uk/mobile-phone/disassemble-motorola-v3-2.html

Good luck.

Feb 08, 2008 | Motorola Mobility RAZR V3

1 Answer

Replacing outside screen

themes

Jan 17, 2008 | Motorola Mobility RAZR V3i Cellular Phone

3 Answers

How to replace broken front glass on razr v3

If this isn't something you have tried before, I would HIGHLY recommend you take the phone and the part to a repair shop. This is a difficult procedure that does require special screwdrivers.

A repair shop will not charge you much for this at all, especially with the part in hand.

Dec 02, 2007 | Motorola Mobility RAZR V3