Respected sir i am using samsung monitor 2033sw . The monitor was doing fine until now but a brightness problem has occurred. i am unable to control the brightness and there is a flickering problem also .Brightness is increased to maximum after i start the pc. please help

Hi, if the monitor have built in speakers then it will have push button controls to control the sound output. Maybe a menu will come up and you have to navigate to the right tabs. hope this helps, Ketan

Check all connections (power and data cords on both ends). Otherwise, these don't last forever and may be near the end of it's useful life.

have some problem i m uing hp 7540 crt monitor it showing every time atomtically displying usermode how to stop user mode

monitor playback defective need replacement

http://downloadcenter.samsung.com/content/UM/200810/20081024105827812/BN59-00803A-Eng.pdf

To adjust the brightness follow this iamge:

We can try a work around:
Depending on which video card you have you can control the brightness in it's advanced settings. This is just "general" information. You'll have to do some work in finding out IF and WHERE you can do this yourself.
OR if you are unable to figure it out you can write me back with the model of your computer and I'll do my best to help ;)

You need to install the driver for your samsung sync master 2033, so the the graphics will improve or updated.

It will be more likely to have power supply problem, open it up and look for bad caps with bulging tops first and report back what you see so we can guide you further, see failed SAMSUNG monitors due to bad caps: http://s807.photobucket.com/home/budm/allalbums

sir,
i am having the problem of displaying the like following given in my monitor always and i cant see the anything displaying on the center .i dont know,how to rectify it.please give solutions to rectifying that.