Question about Netopia Computers & Internet
This is usually a sign that a function has not completed or a switch has stuck in an incorrect position. eject can only happen if the sensor (either optical or mechanical senses that a tape is present. The swich might be stuck or the sensor might be blocked or bad. You can open up the unit and try to determine if the sensors are not being blocked by any of the mechanical parts of the unit. You will need the service docs to show you where the components are located. I hope this helps. Shuttle83
Posted on Sep 06, 2007
You can try enabling your pop up blocker in internet options, but this is a problem i have never heard of before, and now i see that 3 of my people have it.....hmmmm
The proper method to bring resolution to the issue is to reset the modem. If it keeps doing it, you need to call your ISP and have them swap it out. If its a netopia 3347, those are new, it only came out last year, call your ISP and have them swap it out, there shouldnt even be a charge. 1-877-SBC-DSL5, thats 1-877-722-3755. When you're prompted, say 'tech support' for tier 1.
Posted on May 01, 2009
Reset your netopia by holding the reset button in for at least 30 seconds.
Reconfig your netopia again.
You do this by opening internet explorer. It will say "Page cannnot be displayed"
type 192 168.1 254 in the address bar (where you normally type www)
the username is admin
the password is the serial number on the bottom of the netopia
click on configure
click on quickstart
put in your userID like [email protected]
and your password
click submit at the bottom
and then click the yellow triangle dealie at the top right
click save and restart the database
when it comes back on in a few minutes, you'll be online
If this doesnt resove the issue, then your firmware is messed up and its time to swap out the netopia.
Posted on Jun 22, 2009
you can find reset button in back side of it.
Press reset button for 10 seconds you can press it with niddle .
Then ci\onfigure it again
You can access your router with
type user name as "admin" and password as "admin" or blank or "password"
thenh configure it as your isp settings.
Posted on Aug 01, 2009
it's all a tecnical issue and Codemasters say it won't be fixed before the end of this weekend.
It's all in the official forum:
Posted on Aug 02, 2009
Tips for a great answer:
Mar 17, 2014 | Computers & Internet
Jul 01, 2017 | Norelco 3605 X Electric Shaver
Nov 14, 2010 | Sharp Microwave Ovens
5.Open the browser,ie: internet explorer in the computer.
6.Type in the DEFAULT GATEWAY (Eg: 192.168.1.1) in the address bar of the internet explorer and hit enter.
7.You will be logged into the Netopia router setup page where you can check the security on the router, when you click on the security option
Thanks & Regards,
Oct 17, 2010 | Netopia 2247NWG-VGx Wireless Router...
Aug 17, 2009 | Netopia 3-D Reach (TER/GUSB-N1)...
May 29, 2009 | Netopia (3347NWG-ENT) Router (3347NWGENT)
Mar 25, 2009 | Netopia (3347NWG-ENT) Router (3347NWGENT)
Feb 26, 2009 | Netopia (3347NWG-ENT) Router (3347NWGENT)
Feb 18, 2009 | Netopia Cayman 3347W-Ent Wireless Router
Dec 09, 2008 | Netopia (3347NWG-ENT) Router (3347NWGENT)
Jun 24, 2017 | Netopia Cayman 3386-ENT Router
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: