Callers cannot hear me

Check to see if you have it on mute. Go into your menu options and under sound hit ok It should show master volume, keypad, earpiece,speaker try master volume then volume up .

Hello,
If callers cant hear you when you speak to them on your phone,it means that your phones mouth piece is bad and you need to replace it and to do that you need to take it to phone repair shop.

You can also try using an external ear piece attached to the phone to make and receive calls before you fix the phone.
I hope this helps you. contact me for more help.

Please see the link below for the User's Guide.

• Headset is muted. Long press (3 sec.) the volume down button on headset to unmute the microphone. See page 16.
• Improper positioning of voice tube. Try various other positions.
• Voice tube may be clogged. Remove voice tube and test to see if callers can hear you without it. If they can, then replace the clogged voice tube. See page 18.
• Speaking volume is too low. Increase the speaking volume by
adjusting the speaking volume minor adjust buttons on the base unit as described on page 16. If the volume is still too low, select another speaking volume major adjust setting as described on page 16.
• Incorrect configuration dial setting for your phone. Try other
phone configuration dial settings on the base unit. Ensure the
selected number is in line with the position indicator. See page 14.

Plantronics CS70 User's Guide

Good luck from Headsets Direct!

Hello,

Since you can hear them but they cannot hear you, the problem is your mouth piece.

All you need to do is to change your mouth piece,because it is now bad.

Meanwhile, i advice you get hands free,before you fix your mouth piece problem. this will help when you call, the callers will be able to her you with the hands free and you can also hear when people call you.

Take care.

if you cant hear caller voice. do one thing go to gallery and go to voice recorder and record some voice then save that then go to media and play recorded sound if its working means your loud speaker is working but not ear peic means (ear speaker) not working. so then you need to change ear speaker.you can do your self just watch video on online.

Your phone is broken, the only solution is to replace it. Call Uniden Customer Service and they should be able to help you. 1-800-297-1023. ( I'm serious, there is no way you can fix this problem with out opening the base unit up and replacing a bad transistor)

What type/amke/model of phones?

Yes it very well could be your phone lines and not the system. Call your provider and tell them you have low speech path on your lines. They will troublshoot it.

try with ur handsfree that u got with phone or replce ur mic or clean the hole near ur swich side from where u speak. reply me

Had the same problem with the BT250v 'connected' to my Nokia 6021. When connected to my notebook, the 250 did produce sound, so decided the Nokia was the problem. Fixed the problem by doing a full reboot of the phone like this:

 

Jabra: Turn off the 250

Phone: Delete the BT connection to the Jabra (in BT settings)

Phone: Switch off BT

Phone: Turned off the phone (I've even removed the battery)

Phone: Turned on the phone

Phone: Switch on BT

Jabra: Turn on the 250 for detection

Phone: Look for audio devices

Phone: Connect to Jabra

 

Problem fixed!