My CD player was playing at first, but all-of-a-sudden it says error on the tracks as soon as the cd loads up. I don't know what the problem is. I need your help.
If a CD or DVD is loaded, there is a microswitch that is activated and is the tray where the CD is somewhere inlaid as a switch if it will be activated at the back or under side the laser focus degree to the table of contents of the CD read, so if this does not happen any error indication or nothing then there is the potential problem because everything is timed during the CD intake.
Posted on Mar 02, 2016
Your cd-player fails to read the discs. assuming the disc isn't damaged your problem might result of many diffrent reasons, from dirty lens to bad mechanism, memory problem or bad circuit. You will need to have it checked by a professional technician.
Posted on Mar 16, 2006
Please try to put in an ordinary audio CD track and see if this is detected. If yes the optical is working, if not there is no laser scanning and the possibility of the head being faulty is high.
Now certain cleaner disks are not read and so will not be tracked.Try to open and do a cleaning manually of the laser head eye with a cotton bud very softly and without any pressing of the lens eye.
make sure that the Cd is loading into the drive and sets into the head if not the loading mechanism has some errors and must be reset for proper loading into the slot. possible obstruction or dirt accumulation must be checked.
529 views
Usually answered in minutes!
×