Question about Mitsubishi WD-62526 Projection TV

1 Answer

WD-65734 Mitsubishi TV won't turn on. System reset

Posted by mingle_david on

  • mingle_david Aug 27, 2011

    No lights of any kind. The problem occurred after a thunderstorm. It was connected to a surge protect device, which shut everything off. All other equipment worked after protect device was reset. Could be the power supply. Need help in further troubleshooting.

×

Ad

1 Answer

David Briscoe

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Are there any lights lit on the front of the TV? Have you checked for a bad lamp? When you reset the TV the timer/power light should flash on and off rapidly for 60-70 sseconds. Does that happen?

Posted on Aug 26, 2011

  • David Briscoe Aug 27, 2011

    Yes, you're probably right. The power supply is evidently bad. I wouldn't recommend trying to troubleshoot a surge damaged power supply board. There are probably several components damaged on the board, not to mention possible safety issues. It would be much better to replace the entire board.

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen went completely white but still have sound


Try with the Mitsubishi remote the soft restart, set on Menu,1,2,3, and enter.

Dec 07, 2012 | Mitsubishi WD-65734 65" HDTV

1 Answer

I need a code for my samsun blue ray to be used with the Mitsubishi wd-65734 remote


The Mitsubishi has a list of its codes in the owner manual and also I think has a search mode---can try all possible codes one at a time.

No owner manual? Google the model number of set with "manual" if cannot find let me know with a comment here and I will try for you.

SD TECH

Apr 24, 2012 | Mitsubishi WD-65734 65" HDTV

2 Answers

Mitsubishi wd-65734 65 in. Tv shuts off on its own and red lamp light comes on. after a few minutes i can turn it back on and works fine for a few min to an hr before doing it again. anyone no wat the...


Same thing on my tv after replacing lamp. Lamp manufacturer advised me that after changing bulb, tv must be reset or tv will go into safety mode and will not turn on. To do this on my model WD-65734 you must hold reset button in with a pen or paperclip for about 10 secs.The LED will start blinking for a few mins. When itstops you need to unplug tv set for about 1 hour. After this the tv will be reset.

Apr 22, 2012 | Mitsubishi WD-65734 65" HDTV

2 Answers

Mitsubishi WD-60735 Control issues


This set has aside from the recessed front reset two more done with the Mitsubishi remote.

The soft reset "should" be with set on Menu, 1,2,3, enter

The hard reset requires a 4 digit number code and is based on model number and also done with the Mitsubishi remote--try to see if soft reset works at all on this model.

Mar 31, 2012 | Mitsubishi WD-60735 Projection Television

1 Answer

WD-65734 Mitsubishi TV won't turn on. System reset does nothing. Fuse OK.


Does the front light blink a pattern. If so this may be used to lookup the error codes.

Aug 26, 2011 | Mitsubishi Televison & Video

1 Answer

The color on my Mitsubishi WD 65734 rear projection tv just went out. I did not hear anything. I just turned it on and had no color.


With the Mitsubishi remote: have set on and hit Menu, 1,2,3 enter to do a soft reset of the unit.

I would also suggest you check all connections if you are using a box for signal and look to see if have color from DVD or blue ray etc.

Let me know what you find with a comment here before you rate this solution.

SD TECH

Jun 18, 2011 | Mitsubishi Televison & Video

1 Answer

I have a 65" Mistubishi WD - 65734 and have no


Yes,"LAMP" LED light indication front of tv bazel frame is on or blinking,yes mean tv projection lamp life are over.The whole tv warrenty only for a year,tv projection lamp should last at leat 1 1/2 or 2 years,by tv been on and watches used it like 4 or 5 hours daily?U never done tv replacement parts,any kinds before?Yes,hire a tv Tech. to do it.Shop around for a Tv tech.should replaced the projection lamp for u shoud be around $250 to $300 that including part the projection lamp.

Jan 03, 2011 | Mitsubishi WD-65734 65" HDTV

1 Answer

How to reset lamp timer on mitsubishi wd-65734


This model there is no reset for lamp timer.

Nov 14, 2009 | Mitsubishi WD-65733 65" HDTV

1 Answer

Same problem on 18 month old Mitsubishi


As an experiment..plug the tv out of the wall. Wait. plug it back in. Does the green light stop blinking? If so, then the TV needs to go through setup/netcommand again. If not, the problem may not be an easy fix.

Jul 08, 2009 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-62526 Projection TV Logo

807 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1258 Answers

The Knight
The Knight

Level 3 Expert

76455 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...