- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This problem is not from monitor side,check computer RAM.Clean it twice and reinstall it on place.If you are using VGA card then disconnect it from PCI slots and connect VGA cable to on board VGA . I think it solves your problem.Let me know
put the crt screen downward pull plastic button and keep pulled then give the shock to base the base will be removed then take the flat screwdriver then look the gap at upper side and insert the screwdriver into it move screwdriver downwards there are two locks bend it by screwdriver the monitor will be opened
This monitor's standard resolution is 1280x1024. I would update your graphics driver. Just go into System Properties, and open up the Device Manager. (Press WinKey+Pause/Break key to open System Properties, and Device Manager is in the Hardware tab.) Locate the graphics driver in the Device list, right click and update the driver.
its reaching the end of its life im afraid, the FETs are slowly giving up. however make sure it is far away from electromagnetic sources, eg: speakers etc... and in its menu there should be a "de-gauss" button! give it a whirl!