I own the TEC Patio II Grill. I am replacing the ignitor switch. Where do i attach the wire for this unit. It did not come with instructions. Thank you, ML

Here's a link to where you can find all that you need, as far as parts and the Owners' Manual, which will show you how to replace the ignitor electrode.

http://www.appliancefactoryparts.com/gasgrillparts/brands/tec/

Hope this helped you. Please let me know & Happy Grilling.

Assuming you are talking about the TEC Patio II grill. it is made by the Thermal Engineering Corporation of Columbia South Carolina http://www.tecinfrared.com/home.php. the burners are sold as complete replacment parts as well as pieces of the burner sold seperately. It has a ceramic insert as part of the infrared burner. You may replace just that portion if that is all that is bad. if this has failed on your grill I would highly suggest spraying the four bolts that hold it in place (visible from the top of the grill with grates removed) with a penetrating oil several times over several days before attempting to remove them. Mine came out just fine and the grill is 12 years old. I love this grill even though there is a built in 12000 dollar grill on my patio.good luck

Do you have gas getting passed the reg .

It is not your Gas jets it is your burners they or clog or crack,When that happen too much air gets in there they go out Replace them and that will take car of your problem!

http://www.appliancefactoryparts.com/gasgrillparts/brands/tec/

I have the same problem with my 12 year old Tech Patio II. Have you found a solution? I will call the manufacturer myself to see if they can help. They are most helpful.
Leslie

the mesh could be split or blocked burner needs cleaning .

try www.apliancefactoryparts.com

you can order new ceramic plates from tec it is only clipped in they should be able to send instructions

You'll need part #P2CKLP-NT Now all you have to do is find yourself a local TEC dealer