How do I enable DMZ on the router? - SMC Barricade 7004

You need to download the user guide from here

TRENDnet Support

Basically

1. Make the computer or network device (for which you are establishing a DMZ link) has a static IP address (or you can use the DHCP reservation feature to ensure the device has a fixed IP address) (see "Set up DHCP reservation" on page 29).
A. Signing up for a Dynamic DNS service (outlined in the DDNS section) will provide identification of the router's network from the Internet.
2. Log into your router management page (see "Access your router management page" on page 22).
3. Click on Access, and click on Firewall & DMZ.

4. Next to DMZ Enable, click Enabled.
5. Next to DMZ Host IP, enter the IP address you assigned to the computer or network device to expose to the Internet.
6. To save changes, click Save Settings.

To enable DMZ in Linksys wifi router follow the steps below:

1. Access the router's web-based setup page. For instructions, click here.
2. Click on Applications & Gaming.
3. Click DMZ.
4. Select Enabled and set the Source IP Address and Destination.
5. Click to apply your changes. The DMZ feature of your router is now successfully enabled.

1. Open your web browser, type in the router's IP address (standard: 'http://192.168.2.1') and press enter.
2. Click on Login, Advanced Setup, Firewall, enable it and click on apply.
3. Click on DMZ and select Yes to enable DMZ.
4. Enter the IP address of the PS3, which was assigned a static ip address to be kept under DMZ, and click on apply.

Hope this helps

Access the router's built-in web-interface, and access the router's web-page where you "enabled" the port-forwarding. Then, "remove" or "delete" the settings.
Then, access the router's web-page that defines which of your computers/XBOX is to be placed into the 'DMZ' ("De-Militarized-Zone"). Put your XBOX, not your desktop, into the 'DMZ', to allow it "full" access to the Internet, i.e., bypassing the protection of the "firewall" that is inside your router.

Hi jbourke,
Please find the below steps,

1.In the internet explore type 192.168.2.1 and click on enter
2.you will get the belkin router setup
3.in your left hand side you will see the menu sysem settings at the last,click on it.It will ask for password leave it blank and click on submit
4.you will have the UPNP option enable it and click on apply changes

FOR DMZ

1.In your left hand side you will see DMZ,click on it,if it ask for password then leave it blank and click on submit
2.get the ip of the PS/3 it will be in the range of 192.168.2.
3.select the enable and type the ip address in the page and click on apply changes

Regards,
Ayyasam

1. Log into your router. (If you need help how to do it let me know!)
2. Go to th "Application & Gaming" tab.
3. click on "DMZ"
4. choose "Enable"
5. Enter the IP address of the computer you want to put in the DMZ.
6. Click "Save Settings"
   

Some notes:

• Putting a computer in a DMZ is pretty risky, because all ports to this computer are opened. Make sure that all recent patches are applied and your virus software is up to date! A more secure solution is to use portforwarding. (See this site how to do that for a specific software for your router.)
• Your computer should be set to a static IP. For two reasons:
• A) DMZ will not work if your DHCP server (your router) assigns at one point a different IP address to your computer,
• B) If a different computer gets the Ip address assigned that you specified in your DMZ settings, then that machine is exposed.

If you don't know how to assign a static IP address, let me know and I walk you through the steps.

If you have any more questions, just come back here and leave a comment - I'm happy to help.

you can enable the dmz of your modem to open ports. if you have an existing or 3rd party router, try opening the ports of your router by also enabling the dmz mode. also, check parental control of your modem. if there is, deactivate it. if you will be able to enable dmz and able to download movies, disable immediately the dmz for security purposes.

NEED TO FIND THE DRIVER FOR WESTELL MODEL 6100F cAN YOU HELP?

You just need to access your router setup page then go to Firewall then select DMZ, To put a computer in the DMZ, enter the last digits of its IP address in
the IP field and select “Enable”. Click “Apply Changes” for the change
to take effect.

1. Open your web browser, type in the router's IP address (standard: 'http://192.168.2.1') and press enter. 2. Click on Login, Advanced Setup, Firewall, enable it and click on apply. 3. Click on DMZ and select Yes to enable DMZ. 4. Enter the IP address of the machine, which was assigned a static ip address to be kept under DMZ, and click on apply.