Question about SMC Barricade 7004 Router

1 Answer

I am unable to access the router's web interface.

Posted by Anonymous on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 130 Answers

* Check for restrictive Firewall settings. * Clear the cache of your web browser. * Try with a different web browser (e.g. Mozilla Firefox, Opera) * Try to access the router from a different computer.

Posted on Feb 19, 2006

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Unable to access configuration utility webpage for an airlink 101 431w accesspoint.

Use an Ethernet cable to connect from one of the LAN ports on the router to the network port on your computer.
Click Start
Click Run
Type CMD
Press Enter
Type IPCONFIG /RENEW
Press Enter
Look for output like: Default Gateway ... 192.168.1.234
Start Internet Explorer
Type http://192.168.1.234
Press Enter
Use the ID/password for the router to login to the router's web-interface.
Click to access the configuration wizards.
0helpful
1answer

I have a Dynex router model 10/100m router. I hooked up a netgear Prosafe Wireless Access Point model wg302. I have wireless internet connection but I am unable to "secure" the line. I have...

Any wireless security settings are going to be accessed from the netgear. When you chain one device to another, you need to know what the IP address the access point is assigned in order to log into its web interface. the wireless options will be missing if you just simply log into the Dynex web interface. To figure out the APs address, you may have to manually configure it to keep it simple.
0helpful
1answer

I have problem disconecting my internet and was told to change the chanel ,ho to get to chanels?

You'll have to access the web interface of this router using your web browser.
From page 10 of the user manual, follow this link to access your web interface: http://192.168.1.1
The default password, if no one has changed it, is "admin" with no user name.
0helpful
1answer

How do i add the mac address of my printer to the list of permitted devices

Disconnect the Ethernet cable between the router and the cable-modem (or DSL-modem).
Access the web-interface inside the router.
Allow "all" MAC-addresses to access the router.
Turn the printer off.
Turn the printer on, so that it gets a "fresh" IP-address from the router.
On the router's web-interface, get it to show a list of the "active" DHCP-connections.
It should show the IP-address and MAC-address for your printer.
Copy that MAC-address, and the MAC-address of your computer.
On the router's web-interface, access the table of "allowable" MAC-addresses.
Add the two MAC-addresses.
Enable the "selected MAC-addresses only" option.
Reconnect the Ethernet cable.
1helpful
1answer

Unable to access a netgear router's web administration gui

Well, try the below steps to login to the interface:

1. Connect a computer to the router using any one of the 4 available ports.
2. Open a web browser (Internet Explorer, Mozilla Firefox or Safari).
3. Access the router, usually by typing 'http://192.168.1.1' or 'http://www.routerlogin.com' in the address bar.
4. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
Hope this allows you to resolve the issue.

Regards

Anand
0helpful
2answers

Do i access web-based user interface with my

u can access it via both but when its the first time, it has to be done via wired only
0helpful
1answer

Unable to access web management interface of wireless router

First press RESET button it is in back side of router press it for 10 seconds so all settings are defaults.

Then connect your router to computer with ethernet cable.
Then access it with following link.
http://192.168.1.1
or
http://192.168.0.1
type user name as "admin" and password as "admin" or blank or "password"

Let me know if you need more assistanse.
Thanks.
0helpful
1answer

Unable to connect cable/DSL router with my new att dsl service.

access web interface configuration page http://192.168.1.1 user: admin password admin (this is by default). Go to basic settings. look for MAC clone. click this. power cycle modem and router.
0helpful
1answer

I am unable to access the router's web interface.

* Check for restrictive Firewall settings. * Clear the cache of your web browser. * Try with a different web browser (e.g. Mozilla Firefox, Opera) * Try to access the router from a different computer.
0helpful
1answer

I am unable to access the router's web interface.

* Check for restrictive Firewall settings. * Clear the cache of your web browser. * Try with a different web browser (e.g. Mozilla Firefox, Opera) * Try to access the router from a different computer.
Not finding what you are looking for?

Open Questions:

SMC Barricade 7004 Router Logo

Related Topics:

138 views

Ask a Question

Usually answered in minutes!

Top SMC Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2278 Answers

Resolution IT Dubai
Resolution IT Dubai

Level 3 Expert

541 Answers

Cindy Wells

Level 3 Expert

6309 Answers

Are you a SMC Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...