Web Configuration Screen

You have to type admin in X2

I assume you're trying to access the unit with something like http://192.168.1.1 or whatever the default address is. And what happens then? A page-not-found error? Can't connect? The most likely causes for the problem are

• The wireless adapter (or Ethernet adapter, if you're using that) on your computer is not set to obtain an automatic IP address and is not on the same IP network as the router
• The router's IP address has been changed from what you are expecting
• If you can ping the router but not connect to its web interface, your browser may be configured to use a proxy; that should be turned off when connecting directly to the router.

Login to router and change the wireless channel on which the router is transmitting wireles signals.

Pretty old router that you have. Ugrade your router and stay tension free with the newer routers as they work fine and have low downtime.

The IP address 192.168.0.1 you use with your browser is not to get into the Dlink WEB page, it is to get into the DLink router configuration, to set up the router and wireless security eg. network SSID, turn off SSID brocast, WEP/WAP encryption, MAC address filtering etc.

You may have to remove proxy settings on your Internet browser. Or, remove the dial-up settings on your browser. The computer may not have received an IP address. Restart the computer or run the ?winipcfg? utility to dynamically assign the IP address (?ipconfig? for NT users), and then launch the browser.

Yes, ALL of NETGEAR routers come with a DHCP server, which is set to be active by default.

All NETGEAR 802.11b and 802.11a adapters, access points and wireless routers, including: * WAB102 Dual Band AP * ME102 802.11b AP * HE102 802.11a AP * 802.11b adapters: MA101, MA311, MA401, MA701 * 802.11a adapters: HA311, HA501 * MR314 802.11b router * HR314 802.11a router * MR814 802.11b router Also, the WAB501 will interoperate with other manufacturer's 802.11a and 802.11b products that are based on the Wi-Fi standard.

All NETGEAR 802.11b and 802.11a adapters, access points and wireless routers, including: * WAB102 Dual Band AP * ME102 802.11b AP * HE102 802.11a AP * 802.11b adapters: MA101, MA311, MA401, MA701 * 802.11a adapters: HA311, HA501 * MR314 802.11b router * HR314 802.11a router * MR814 802.11b router Also, the WAB501 will interoperate with other manufacturer's 802.11a and 802.11b products that are based on the Wi-Fi standard.

The initial factory default Web Manager password is '1234' and the user name is ?admin?.

The initial factory default Web Manager password is '1234' and the user name is ?admin?. Doc ID: N100515.asp