Linksys WRT51AB Wireless Router Logo

Related Topics:

Question about Linksys WRT51AB Wireless Router

1 Answer

Finding the MAC Address of a Macintosh

I need to clone my MAC address, however I have a Macintosh, where do I find the MAC Address?

Posted by Anonymous on

Add Your Answer
Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points
    MVP:

    An expert that got 5 achievements.
    Novelist:

    An expert who has written 50 answers of more than 400 characters.
    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 196 Answers

Please follow the instructions which fits the Mac OS that is being run: OSX 1. Click on the Apple menu and select the System Preferences option. 2. In the "System Preferences" window, Select Network. 3. When the "Network" Window opens, select Built-in Ethernet and/or Airport from the "Show" Menu. 4. Once you do this, look near the bottom and you will see the Ethernet Address or Aiport ID. This is the MAC Address, make note of it. OS9 and below 1. Click on the Apple menu option. 2. Go to the Utilities folder 3. Open the program called Apple System Profiler 4. Select the System Profile tab 5. Under Network Overview > Appletalk> 6. Once there you will find the Hardware address, this is the MAC Address, make note of it.

Posted on Feb 16, 2006

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Purchased new 3g router for wireless access to internet. Can't get on to internet? Have checked forums and followed suggestions none work todate. Laptop and broadband wireless modem works fine without...
You may need to clone your MAC address, a unique address is for each device connected to a network. Some internet service provider (ISP) modems quit working if the MAC address of the device connected to its Ethernet or LAN jack (i.e., your computer) changes from the one used when it was first set up. So when you hook up a new router to share the connection, you run into the problem you have.

Cloning the MAC address in the router sets it to the same address as the device connected to its number 1 wired port. Since you didn't give the brand and model of your router I can't give you specific steps or links to follow for the process. But it's typically very simple. From the computer originally used to set up your modem, access the router's setup pages. On the appropriate page, pick "clone MAC address" from a menu or click on a button. You can search for "<insert your brand of router here> cloning MAC address" and find many sites with how-to information. A good starting point is always the router manufacturer's site, where there is probably already an answer in their support FAQ section.

Once the router MAC address has been cloned, you should have your Internet access back and will be able to use the wireless access.

Once the MAC address in t
Read full answer
Mar 20, 2011 • NetComm Computers & Internet
0helpful
1answer

Need to mate my rotor with my cable internet
You need to get to the web configuration page of your router and clone the MAC address of your modem. It's because cable internet providers uses MAC address of a device to be able to connect to their server.

You can follow this manual to access the web configuration tool and look for the topic MAC Cloning Address.

http://downloads.linksysbycisco.com/downloads/WRT54GL-EU_11_UG_A-WEB.pdf

If in some case, your internet didn't work after connecting the router and after cloning the MAC address of your modem. Try to turn off your modem and disconnect everything from there, turn off your router as well and disconnect everything. Wait for 1 minute and plug the power cord back to your cable modem and plug the ethernet cable. Wait for 1 minute, turn reconnect everything to your router to the modem, and Clone the MAC address again.

Hope this helps.
Read full answer
Jan 13, 2010 • Linksys Wireless-G WRT54G Router
0helpful
2answers

Unable to connect to Comcast router
  • access the router page and set to router mac address using PC mac address, for detaiks call zonet tech support
Read full answer
Aug 11, 2009 • Zonet (ZSR0104UP) Router
0helpful
1answer

I have a Netwave Base G4 wireless router w/ 4- port switch,trying to network two computers via cable modem using local ports,modem and router not communicating
You need to change the LAN IP address of your router. Open the router's admin through http://192.168.1.1 and look for router's IP address or Local IP Address. Change it to 192.168.10.1 and save the settings. Reboot the router after that. If you are on cable internet , you need to do MAC Cloning. Access the router's admin page and look for MAC Clone settings. Enable and clone the PC's Mac Address. Save the settings and power cycle the router and the modem after that.
Read full answer
Aug 02, 2009 • Blitzz Technology (BWA611) Router
0helpful
1answer

MAC address
Why do you want to clone the router's MAC address?

If you want the router's MAC address, go to the Admin (I believe it is) page.
That button is for cloning your Desktop or Laptop computer's MAC address, and unless you are being instructed to, there is no need to.
Read full answer
Jan 19, 2009 • Linksys Wireless-G Broadband Router
0helpful
1answer

TP-LINK TL-WR340G, No internet connection
Look for the MAC address clone feature on the router. If the router does not ahve the auto clone MAC feature, you'll need to manually input the MAC address of your computer.

To get the MAC address or Physical address of the computer do this
Click start>run>type in "cmd" and press okay (without the " ").
On the Command prompt type in ipconfig/all and then press enter, look for physical address.
Then input that on the MAC clone feature of the computer to your router and then power cycle everything (turn everything off and then turn on modem first-then router-then computer).
Read full answer
Sep 12, 2008 • Trendware TEW-630APB (TEW630APB)
2helpful
1answer

MAC address cloning
Hi killer - MAC (Media Access Control) cloning is used to clone your MAC address.
Some ISPs (most notably MediaOne) use your NIC's MAC address to authenticate your service. When you change the computer that you have connected to your cable modem service, you usually have to call up Tech Support and give them the MAC address of the NIC in the new machine. Since hardware routers have the equivalent of a NIC on their WAN port in order to connect to your cable modem, you would have to do the same thing if you're installing a router.
Recently, however, some ISPs have started to recognize the MAC addresses of popular routers and disconnect service if a router is detected. Fortunately, many router manufacturers are including the capability to either set the router WAN port MAC address to anything you want, or copy it from a computer connected to the router LAN side. You can check the Router comparison chart under "Mac addr. clone" to see which routers support this feature. Then consult the router's documentation for directions on using the feature.
So basically, it's used to fool ISPs into thinking there isn't a router. If the router has the same MAC address as either your NIC card or your modem the ISP won't detect and service won't be interrupted. Most ISPs don't do this so iy's rarely needed.
If this answers your question PLEASE rate this as fixed. If you need more help just add a comment and I'll be happy to assist you further. Thanks.

Jeff
Read full answer
May 22, 2008 • Belkin (F5D7230-4) Router (587009)
0helpful
1answer

Finding the MAC Address of a Macintosh
OSX 1. Click on the Apple menu and select the System Preferences option. 2. In the "System Preferences" window, Select Network. 3. When the "Network" Window opens, select Built-in Ethernet and/or Airport from the "Show" Menu. 4. Once you do this, look near the bottom and you will see the Ethernet Address or Aiport ID. This is the MAC Address, make note of it. OS9 and below 1. Click on the Apple menu option. 2. Go to the Utilities folder 3. Open the program called Apple System Profiler 4. Select the System Profile tab 5. Under Network Overview > Appletalk> 6. Once there you will find the Hardware address, this is the MAC Address, make note of it.
Read full answer
Feb 16, 2006 • Linksys EtherFast Cable/DSL and Voice...
0helpful
1answer

Finding the MAC Address of a Macintosh
OSX 1. Click on the Apple menu and select the System Preferences option. 2. In the "System Preferences" window, Select Network. 3. When the "Network" Window opens, select Built-in Ethernet and/or Airport from the "Show" Menu. 4. Once you do this, look near the bottom and you will see the Ethernet Address or Aiport ID. This is the MAC Address, make note of it. OS9 and below 1. Click on the Apple menu option. 2. Go to the Utilities folder 3. Open the program called Apple System Profiler 4. Select the System Profile tab 5. Under Network Overview > Appletalk> 6. Once there you will find the Hardware address, this is the MAC Address, make note of it.
Read full answer
Feb 16, 2006 • Linksys BEFSR11 Router
0helpful
1answer

Finding the MAC Address of a Macintosh
in OSX: 1. Click on the Apple menu and select the System Preferences option. 2. In the "System Preferences" window, Select Network. 3. When the "Network" Window opens, select Built-in Ethernet and/or Airport from the "Show" Menu. 4. Once you do this, look near the bottom and you will see the Ethernet Address or Aiport ID. This is the MAC Address, make note of it. OS9 and below: 1. Click on the Apple menu option. 2. Go to the Utilities folder 3. Open the program called Apple System Profiler 4. Select the System Profile tab 5. Under Network Overview > Appletalk> 6. Once there you will find the Hardware address, this is the MAC Address, make note of it.
Read full answer
Feb 16, 2006 • Linksys BEFSX41 Router (DHBEFSX41)
Not finding what you are looking for?

View Most Popular

WRT51AB Wireless Router

  • Computers & Internet

Related Question

Purchased new 3g router for wireless access to internet. Can't get on to internet? Have checked forums and followed suggestions none work todate. Laptop and broadband wireless modem works fine without...

  • NetComm Computers & Internet

Open Questions:

0answers

PhotoStory on CD & DVD 9 will not start Hi I am trying to reinstall my program on win 10 new pc
Read full answer
Be the first to answer May 17, 2022 • Computers & Internet
0answers

How to reset hp 635 Windows 7 laptop without a disk
Read full answer
Be the first to answer May 17, 2022 • HP Computers & Internet
0answers

I have a vmx200 mixer everything lighting and stuff jus no output from the master output or any other output what can cause this plz help It was working great an jus stop plz help me
Read full answer
Be the first to answer May 17, 2022 • The Computers & Internet
0answers

hi i have a bonaire evap aircon and i have EC 41 then Co 22. Can someone help me plz? thanks
Read full answer
Be the first to answer May 17, 2022 • Computers & Internet

See all Linksys WRT51AB Wireless Router Questions

Related Topics

170 views

Ask a Question

Usually answered in minutes!

Popular Questions

Http://192.168.1.253/

Linksys WRT54GL Wireless-G 54Mbps...

Upgrade Linksys WRT54G2 firmware failed.

Linksys WRT54G2 Wireless Router

Device password????

Linksys WRT160N Wireless Router

I lost my linksys wrt54g2 v1 cd i need to install

Linksys WRT54G2 Wireless Router

Does my WRT160N have a

Linksys WRT160N Wireless Router

Check Out the Mobile Browsers Report
Check Out the Mobile Browsers Report

View all Fixya Reports

Top Linksys Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Mike

Level 3 Expert

4382 Answers

Mehandi Husain ...

Level 3 Expert

1654 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...