Question about Mitsubishi VS-60609 60" Rear Projection Television

1 Answer

The picture started getting a triple image (everything was outlined in blue and yellow). We had a board replaced by a tv repair service, over $300 and the tv was ok for about 80 hours. (warranty on new part ran out before tv reverted back to same problem) We did some wiggling on the board that was replaced and tv was ok for about 2 months. Now the picture is triple image with bright(really bright) pink and aqua colors and the picture is warped looking..

Posted by picnvic on

Ad

1 Answer

Chi Chu

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 8,457 Answers

Ur tv convergence board that was replaced for ur tv.The 2 STK convergence ICS was old it is not new it is those 2 STK convergence ICS on the tv convegence board is dead again and some of the resistors on the board maybe shorted and dies also must replaced too.The tv convegence board was put on ur tv those parts on the convergence board are old components parts,ur must repair tv convergence board again to fixed this problems called convergence pictures problems.

Posted on Aug 22, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Its a 2004 61 inch big screen projection tv and the subject on screen has three colors outlining it green red blue on the outer portion of subject on screen


Tv have a problems known as a convergence pictures problems,it is dead.Tv have R,G,B colors lines mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts on the tv convergence board must be replaced to repair it.To solved tv pictures convergence problems.The shop will cost u like $300-350 for parts and labors.

Jul 05, 2011 | RCA R61WH76 61" HDTV

1 Answer

Tv shows images in red, blue and yellow colors only


Tv have a problems known as a convergence picture problems,it is dead.Tv have colors lines R,G,B mis alignments,have colors shadow pictures or 3D pictures look alike?Yes,than the tv convergence board it is dead.This tv convergence board must be repairs,u must require to replaced components parts like 2 STK convergence ICS and some or all of it resistors too.To fixed the the tv convergence board to solved the tv convergence picture problems.The shop,will cost like $300-350 for parts and labors.

Jun 29, 2011 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Picture seems to be offline( curved down) also everything seems doubled and you can see the red, yellow and blue colors of the lenses on the screen


Tv have a problems known as a convergence problems it is dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?Yes,than the board that call the convergence board it is dead.This convergence board require service must be replacing parts 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board,to solved the tv picture convergence problems mis alignment.The tvs shops,will cost u like around $300-350 for parts and labors.

May 28, 2011 | Samsung HCM4215W 42" Rear Projection...

1 Answer

Seeing triple images of everything


Tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignmenents,have colors shadows or 3D pictures look alike?The tv convergence board have dead 2 STK Convergence ICS and some or all of it resistors too.These parts on the convergence board must be replaced to fix the tv convergence board to solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Jan 03, 2011 | Sony KP-57WS500 57" Rear Projection...

1 Answer

Picture is blurred by tri-colored image (yellow, red, green or blue)


The tv have a problems known as convergence problems.The tv convergence board are dead.These parts on the tv convergence board must have it 2 STK convergence ICS and some or all it resistors replaced,to solved convergence problem.U know basic soldering,have all the tools?Tries websites like Tvrepairworld.com,Tvrepairkits.com to buy a convergence kit to do the repair it ur self.The shop will cost u $300-350 for parts and labors.

Aug 25, 2010 | Mitsubishi WT-46807 46" Rear Projection...

2 Answers

TRIPLE IMAGE


This would be the decoder/tuner board giving out, Your going to need to take it in for a replacment of that board.

you can try to unplug it for a while and see if it resets but i doubt that will cure anything long term. Proscan is known for this issue and have been known to have bad decoders in them.

Thanks for being considerate and leaving a ratings and feedback today.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

May 29, 2010 | Proscan 42LA45H 42 in. LCD TV

1 Answer

Blue off to right outlines everything


The convergence amplifier IC responsible for blue alignment needs to be replaced. This is not an easy repair. Most reputable tv shops charge between $200 to $300 for this repair.

May 07, 2009 | Televison & Video

1 Answer

A wavy line with 3 colors


this a convergence problem and the convergence IC's will need replacing along with some testing of resistors and or replacement
to have a technician come out to do this repair will cost about $300 - $350 to get this fixed

Dec 12, 2008 | RCA HD52W59 HDTV Projection Television

1 Answer

Double picture on Mitubishi WS-65511, Year 2002 TV


Hi,
Your tv requires replacement of STK393-110 as it creates convergence problem and its available Parts Store here. If you want to do the job at your own, you need to know good soldering skills or get service of nearest TV repair shop.

Sep 13, 2008 | Mitsubishi WS-65511 65" Rear Projection...

2 Answers

RCA 56 inch hdwidescreen


Did you use the Automatica Convergence to try and straighten it out? If that does not help, you can manually adjust the convergence.

Jul 12, 2008 | RCA HD56W58 56" TV

Not finding what you are looking for?
Mitsubishi VS-60609 60" Rear Projection Television Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76287 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...