Driver i need sub driver for camcorder sharp vl-z3u do not driver

Go here to download driver
https://www.solvusoft.com/en/update/drivers/camcorder/sharp/vl-z3u/sub-models/

http://support.sharp.net.au/drivers/.

go in these site for sharp driver

I was able to reset camcorder and problem cleared up. Thanks.

I had this problem too.
I searched the web high and low. Even wasted 2.99 on what claimed was the driver but turned out to only be instalation directions.

From what I understand, Sharp no longer supports camcorders, so obtaining the dirver from them is out of the question.

Connecting your camcorder to your computer via USB is only used to transfer photos from your SD on your camcorder. You cannot transfer video via this method.
Here`s what I did to solve the problem of not having the driver.
I got a $10 SD card reader for my computer and this solved the problem.

To transfer video from your VL-Z3U to your computer, all you need is a firewire cable .

Assuming that you have a firewire port on your computer, simply connect your camcorder to your computer via firewire, power up your camcorder and your computer should automaticly recognize your device.
You can now transfer video to your computer using your normal video capture/editing software.

Hope this helps

Hello,

Try searching these posts to see if they will help your problem. Seems this is common. See the link below.

http://www.fixya.com/tags/VL_Z3U

send me driver for it

i need to download usb driver

either it has moisture in it (let it dry), or the dew sensor is bad and needs to be replaced.

look inside the camera to the front.wou will see 2 solder bloba,run a line of solder between them to by pass the dew,it works

the Sharp Website, Have you tried